Autor: |
Gliner, R., Katyukhin, E., Zhalilov, D., Vybornov, V., Pryanichnikov, V. |
Zdroj: |
Russian Metallurgy (Metally); Dec2016, Vol. 2016 Issue 13, p1298-1302, 5p |
Abstrakt: |
A technique for determining the degree of reduction upon forming by cold bulk shaping has been proposed. The technique is based on a comparison of the measurement data on the hardness of a cold-worked metal with that of the same metal subjected to a compression test at a certain strain intensity. The technique has been tested in technological operations of reduction and thread rolling. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|