| Autor: |
Phillips, Adam B., Zhaoning Song, DeWitt, Jonathan L., Stone, Jon M., Krantz, Patrick W., Roystonv1, John M., Zeller, Ryan M., Mapes, Meghan R., Roland, Paul J., Dorogi, Mark D., Zafar, Syed, Faykosh, Gary T., Ellingson, Randy J., Heben, Michael J. |
| Předmět: |
|
| Zdroj: |
Review of Scientific Instruments; Sep2016, Vol. 87 Issue 9, p093708-1-093708-6, 6p, 1 Diagram, 4 Graphs |
| Abstrakt: |
We have developed a laser beam induced current imaging tool for photovoltaic devices and modules that utilizes diode pumped Q-switched lasers. Power densities on the order of one sun (100 mW/cm2) can be produced in a ~40 μm spot size by operating the lasers at low diode current and high repetition rate. Using galvanostatically controlled mirrors in an overhead configuration and high speed data acquisition, large areas can be scanned in short times. As the beam is rastered, focus is maintained on a flat plane with an electronically controlled lens that is positioned in a coordinated fashion with the movements of the mirrors. The system can also be used in a scribing mode by increasing the diode current and decreasing the repetition rate. In either mode, the instrument can accommodate samples ranging in size from laboratory scale (few cm2) to full modules (1 m2). Customized LabVIEW programs were developed to control the components and acquire, display, and manipulate the data in imaging mode. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
