Optimizing electrocoagulation for poultry slaughterhouse wastewater treatment: a fuzzy axiomatic design approach.

Autor: Tanatti NP; Department of Environmental Protection Technologies, Sakarya University of Applied Sciences, 54100, Sakarya, Turkey., Sezer M; Department of Environmental Engineering, Kocaeli University, 41001, Kocaeli, Turkey. mesut.sezer@kocaeli.edu.tr.
Jazyk: angličtina
Zdroj: Environmental science and pollution research international [Environ Sci Pollut Res Int] 2024 May; Vol. 31 (21), pp. 31159-31173. Date of Electronic Publication: 2024 Apr 16.
DOI: 10.1007/s11356-024-33069-4
Abstrakt: White meat consumption is increasing day by day, and accordingly, there is an increase in the amount of wastewater resulting from the processes. Today, the reuse of wastewater has become a goal within the scope of the Green Deal. For this reason, wastewater treatment with high pollution and volume has gained importance. In this study, the fuzzy axiomatic design (FAD) method, one of the multi-criteria decision-making methods, has been used. With this method, coagulation, electrocoagulation (EC), dissolved air flotation (DAF), and anaerobic treatment alternatives preferred in poultry slaughterhouse wastewater (PSW) treatment were compared with each other and their information contents were calculated. The information content from the smallest to the largest is EC, DAF, coagulation, and anaerobic treatment, respectively. This treatment method was chosen because the smallest information content is in electrocoagulation. EC was applied to bloody PSW containing 1% blood by volume. The effectiveness of Fe and Al electrodes for PSW treatment in the batch EC reactor has been compared. The effective surface areas of 2 anodes and 2 cathodes connected bipolarly in the processes are 288 cm 2 . The electrolyte, pH, time, and current density effects on energy consumption were also investigated. The optimum conditions for Al and Fe electrodes were found to be 0.5 g·L -1 NaCl concentration, pH 5, 0.639 mA·cm -2 current density, and 5 min time. Under optimum conditions for the Fe electrode, COD, TOC, TN, and oil-grease removal efficiencies were determined as 76.3%, 71.8%, 70%, and 74%, respectively. Moreover, the highest COD, TOC, TN, and oil-grease removal efficiencies were achieved with an Al electrode (82.2%, 82.3%, 82.7%, and 78.9%, respectively). The experimental data were fit to a variety of isotherms and kinetic models to determine the characteristics of the EC. The results indicated that the pseudo-second-order equation provided the best fit for COD removal. Under optimum conditions, the operating cost was calculated as $3.39 and $3.09 for Al and Fe electrodes, respectively. In this study, the fuzzy axiomatic design method was used for the first time to select the most appropriate treatment method for PSW. In addition, blood, a major problem for the poultry slaughterhouse industry, was mixed with PSW at a ratio of 1% (v/v) and treated with EC for the first time with high removal efficiency. By treating PSW, which has a high pollution load, with electrocoagulation, the pollution load of the water to be given to secondary treatment has been greatly reduced.
(© 2024. The Author(s).)
Databáze: MEDLINE
Externí odkaz: