| Autor: |
Nakanishi A; Graduate School of Bionics, Tokyo University of Technology, Tokyo 192-0982, Japan.; School of Bioscience and Biotechnology, Tokyo University of Technology, Tokyo 192-0982, Japan., Yamamoto N; Graduate School of Bionics, Tokyo University of Technology, Tokyo 192-0982, Japan., Sakihama Y; College of Science and Engineering, Aoyama Gakuin University, Sagamihara 252-5258, Japan., Okino T; Kansai Coke & Chemicals Co., Ltd., Amagasaki 661-0976, Japan., Matoba N; Kansai Coke & Chemicals Co., Ltd., Amagasaki 661-0976, Japan. |
| Jazyk: |
angličtina |
| Zdroj: |
Biotech (Basel (Switzerland)) [BioTech (Basel)] 2022 Dec 25; Vol. 12 (1). Date of Electronic Publication: 2022 Dec 25. |
| DOI: |
10.3390/biotech12010002 |
| Abstrakt: |
This study reports a new carbon material and its specific display of targeted protein. The properties of the carbon materials fabricated with carbon black MOGUL ® were analyzed. The carbon materials were spherical structures with 55.421 µm as a median value. The specific surface area, pore volume, average pore diameter, and total of the acidic functional group were 130 m 2 ·g -1 , 0.55 cm 3 ·g -1 , 17.2 nm, and 0.29 mEq·g -1 , respectively. The adsorption-desorption isoform of the carbon materials showed type IV of the hysteresis loop as defined by IUPAC, indicating non-uniform mesoporous structures (2-50 nm). The distribution of the log differential pore volume also indicated non-uniform porous structures because (i) the difference between the average pore size and the most frequent pore size was significant and (ii) the σ value was larger than the average value regarding the pore sizes. However, 10-90% of the integrated values of the log differential pore volume were 57.4% of the total integrated values, and the distribution was similar to the Gauss distribution model. Although the value of the total of the acidic functional group was 2.5-5.4 times lower than the values of the HPLC columns, the carbon materials require good scaffold quality rather than good HPLC quality. Therefore, the amounts could be enough for the scaffold of biotin hydrazide. To demonstrate the property of displaying the targeted proteins, carbon materials displaying biotin hydrazide by covalent bonding were prepared and avidin-labeled horse radish peroxidase (HRP) was bound to the biotin region. The carbon materials were porous structures, so the unspecific adsorption of HRP was estimated. Then, the maintenance ratios of HRP activities were analyzed in the repeated-use-with-wash processes after each evaluation, resulting in the activities of HRP on the carbon materials being treated with biotin hydrazide being significantly maintained compared to that of the ones without biotin hydrazide. The study revealed the properties of the carbon materials and indicated the display of HRP, suggesting that the carbon materials could be a new material for displaying targeted proteins. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
