Fault Current Limitation in Electrical Power Networks Containing HTS Cable and HTS Fuse.
Autor: | Degtyarenko PN; Joint Institute for High Temperature of the Russian Academy of Sciences, Moscow 125412, Russia.; S-Innovations LLC, Moscow 117246, Russia., Zheltov VV; Joint Institute for High Temperature of the Russian Academy of Sciences, Moscow 125412, Russia., Balashov NN; Joint Institute for High Temperature of the Russian Academy of Sciences, Moscow 125412, Russia., Arkhangelsky AY; Joint Institute for High Temperature of the Russian Academy of Sciences, Moscow 125412, Russia., Degtyarenko AY; Joint Institute for High Temperature of the Russian Academy of Sciences, Moscow 125412, Russia.; P.N. Lebedev Physical Institute of the Russian Academy of Sciences, Moscow 119991, Russia., Kovalev KL; Joint Institute for High Temperature of the Russian Academy of Sciences, Moscow 125412, Russia.; Moscow Aviation Institute, National Research University, Moscow 125993, Russia. |
---|---|
Jazyk: | angličtina |
Zdroj: | Materials (Basel, Switzerland) [Materials (Basel)] 2022 Dec 08; Vol. 15 (24). Date of Electronic Publication: 2022 Dec 08. |
DOI: | 10.3390/ma15248754 |
Abstrakt: | Numerical calculations of parameters of an electrical power network where an HTS fuse is used as a fault current limiting device have been done. The calculations were performed for networks containing different types of HTS cables as well. The design of HTS fuse was developed based on the numerical calculation for the network-rated parameters considering the special types 2G HTS tape characteristics. The distinctive feature of these tapes is the minimal thickness (about 30 µm) of the substrate at the critical current 450-600 A. The tests were performed at a voltage of 1 kV and demonstrated the ability of circuit breaking at fault currents about 3-4 kA. A comparison of experimental results with the calculations allows us to conclude that the HTS fuse of this design can operate as a fault current limiting device in electrical power networks at various rated voltage levels. |
Databáze: | MEDLINE |
Externí odkaz: | |
Nepřihlášeným uživatelům se plný text nezobrazuje | K zobrazení výsledku je třeba se přihlásit. |