Pulsed Light (PL) Treatments on Almond Kernels: Salmonella enteritidis Inactivation Kinetics and Infrared Thermography Insights.

Autor: Harguindeguy M; DISAT, Dep. Applied Science and Technology, Politecnico Di Torino, C/so duca degli Abruzzi 24, 10129 Torino, Italy., Gómez-Camacho CE; DISAT, Dep. Applied Science and Technology, Politecnico Di Torino, C/so duca degli Abruzzi 24, 10129 Torino, Italy.
Jazyk: angličtina
Zdroj: Food and bioprocess technology [Food Bioproc Tech] 2021; Vol. 14 (12), pp. 2323-2335. Date of Electronic Publication: 2021 Nov 04.
DOI: 10.1007/s11947-021-02725-9
Abstrakt: Abstract: Extending the shelf-life and ensuring microbiological safety of food products while preserving the nutritional properties are key aspects that must be addressed. Heat processing of food matrices has been the golden standard during the last decades, while certain non-thermal processing options have recently gained ground. In the present study, experimental pulsed light (PL) surface inactivation treatments of Salmonella enteritidis on almonds kernels are performed. The PL system is set to test different operative conditions, namely power (1000, 1250, and 1500 W) and frequency (1.8, 3.0, and 100.0 Hz) at different treatment times (from 5 to 250 s), which result in applied fluence doses in the 0-100 J·cm -2 range. Additionally, temperature measurements are collected at each operative condition on the almond surface (using infrared (IR) thermography) and at the superficial layer of the almond (1-mm depth using a thermocouple). The observed PL inactivation kinetics are then modelled using four different models. The best goodness-of-fit is found for the two-parameter Weibull model ( R 2  > 0.98 and RMSE < 0.33 for all cases). The maximum achieved log-CFU reductions are 6.02 for the 1.8-Hz system, 4.69 for the 3.0-Hz system, and 3.66 for 100.0-Hz system. The offset between the collected temperature readings by the two sensors is contrasted against the inactivation rate (following the two-parameter Weibull model). It was found that the highest inactivation rate corresponds approximately to the point where the infrared camera detects a slowdown in the surface heating.
Supplementary Information: The online version contains supplementary material available at 10.1007/s11947-021-02725-9.
(© The Author(s) 2021.)
Databáze: MEDLINE
Externí odkaz: