| Autor: |
Raihan MK; Department of Mechanical Engineering, Clemson University, Clemson, SC 29634-0921, USA., Jagdale PP; Department of Mechanical Engineering, Clemson University, Clemson, SC 29634-0921, USA., Wu S; Department of Mechanical Engineering, Clemson University, Clemson, SC 29634-0921, USA.; College of Marine Engineering, Dalian Maritime University, Dalian 116026, China., Shao X; Department of Chemical and Biomolecular Engineering, Johns Hopkins University, Baltimore, MD 21218, USA., Bostwick JB; Department of Mechanical Engineering, Clemson University, Clemson, SC 29634-0921, USA., Pan X; College of Marine Engineering, Dalian Maritime University, Dalian 116026, China.; Maritime College, Guangdong Ocean University, Zhanjiang 524088, China., Xuan X; Department of Mechanical Engineering, Clemson University, Clemson, SC 29634-0921, USA. |
| Abstrakt: |
Having a basic understanding of non-Newtonian fluid flow through porous media, which usually consist of series of expansions and contractions, is of importance for enhanced oil recovery, groundwater remediation, microfluidic particle manipulation, etc. The flow in contraction and/or expansion microchannel is unbounded in the primary direction and has been widely studied before. In contrast, there has been very little work on the understanding of such flow in an expansion-contraction microchannel with a confined cavity. We investigate the flow of five types of non-Newtonian fluids with distinct rheological properties and water through a planar single-cavity microchannel. All fluids are tested in a similarly wide range of flow rates, from which the observed flow regimes and vortex development are summarized in the same dimensionless parameter spaces for a unified understanding of the effects of fluid inertia, shear thinning, and elasticity as well as confinement. Our results indicate that fluid inertia is responsible for developing vortices in the expansion flow, which is trivially affected by the confinement. Fluid shear thinning causes flow separations on the contraction walls, and the interplay between the effects of shear thinning and inertia is dictated by the confinement. Fluid elasticity introduces instability and asymmetry to the contraction flow of polymers with long chains while suppressing the fluid inertia-induced expansion flow vortices. However, the formation and fluctuation of such elasto-inertial fluid vortices exhibit strong digressions from the unconfined flow pattern in a contraction-expansion microchannel of similar dimensions. |
