Influence of ageing treatment temperature and duration on σ-phase precipitation and mechanical properties of UNS S32750 SDSS alloy.
Autor: | Cojocaru EM; Materials Science and Engineering Faculty, University POLITEHNICA of Bucharest, 060042 Bucharest, Romania., Raducanu D; Materials Science and Engineering Faculty, University POLITEHNICA of Bucharest, 060042 Bucharest, Romania., Nocivin A; University OVIDIUS of Constanta, 900527 Constanta, Romania., Cojocaru VD; Materials Science and Engineering Faculty, University POLITEHNICA of Bucharest, 060042 Bucharest, Romania. |
---|---|
Jazyk: | angličtina |
Zdroj: | Journal of advanced research [J Adv Res] 2020 Nov 14; Vol. 30, pp. 53-61. Date of Electronic Publication: 2020 Nov 14 (Print Publication: 2021). |
DOI: | 10.1016/j.jare.2020.11.005 |
Abstrakt: | Introduction: Super-Duplex Stainless Steeles (SDSS) proved an excellent potential for its use in many chemical and offshore applications due to their both high mechanical properties and a high corrosion resistance in chloride ion solutions. Objectives: This study evaluates the influence of ageing treatment temperature and duration on σ-phase precipitation and mechanical properties of UNS S32750 SDSS alloy. Methods: The influence of ageing treatment on microstructural features was analysed by SEM-EBSD (Scanning Electron Microscopy - Electron Backscatter Diffraction) technique, while on mechanical properties by tensile and impact testing techniques. Results: The obtained results show that for the short duration ageing treatments the σ-phase nucleates, within the δ-phase matrix, at the δ/γ grains boundary by the δ → σ precipitation, while for long duration ageing treatments the σ-phase nucleates, within the δ-phase matrix, at the δ/δ grains boundary, or in other favourable nucleation sites, due to the eutectoid decomposition δ → σ + γ Conclusion: All presented data brings valuable insight into the σ-phase precipitation phenomena and its influence on UNS S32750 SDSS alloy's exhibited mechanical properties and, also, can provide researchers and industrial steel processors a guide regarding the selection of optimal ageing treatment parameters to avoid/minimise the embrittlement induced by the precipitation of deleterious σ-phase. Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. (© 2020 The Authors. Published by Elsevier B.V. on behalf of Cairo University.) |
Databáze: | MEDLINE |
Externí odkaz: |