| Autor: |
Patel H; Department of Applied Science and Humanities, Pacific School of Engineering, Kadodara Palsana Road (NH-8), V: Sanki, Ta. Palsana, Surat, 394305, Gujarat, India. hjpatel123@yahoo.co.in. |
| Jazyk: |
angličtina |
| Zdroj: |
Scientific reports [Sci Rep] 2020 Oct 09; Vol. 10 (1), pp. 16895. Date of Electronic Publication: 2020 Oct 09. |
| DOI: |
10.1038/s41598-020-72583-6 |
| Abstrakt: |
The present investigate was intended for adsorption of heavy metals i.e. Pb, Cu, Cr, Zn, Ni and Cd onto activated charcoal prepared from neem leaf powder (AC-NLP) using batch and column studies. Batch adsorption was performed using different variables like adsorbent dose, temperature and contact duration. Thermodynamic analysis of batch treatment concluded that adsorption is thermodynamically feasible and endothermic. This adsorption followed the Pseudo second-order kinetic model derived from correlation coefficient values of chemical kinetic studies. For column study, interpretation of breakthrough curves and parameters were conducted by varying flow rate, initial concentration and bed height; and reveal that optimum conditions were lower flow rate (5 mL/min) and lower initial concentration (5 mg/L) and higher bed height (20 cm). Comparisons of batch and column study through isotherm models were evaluated and column study is more preferred than batch treatment. Maximum Thomas adsorption capacity was achieved upto 205.6, 185.8, 154.5, 133.3, 120.6, 110.9 mg/g for Pb, Cu, Cd, Zn, Ni and Cr respectively. This removal pattern is elucidated by metal ionic properties. Various adsorbing agents such as acids and bases were utilized for adsorption-desorption of AC-NLP. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
