Mechanical Properties of Graphene Foam and Graphene Foam - Tissue Composites.

Autor: Yocham KM; Department of Mechanical and Biomedical Engineering, Boise State University, 1910 University Dr., Boise, ID, 83725, USA.; Micron School of Materials Science and Engineering, Boise State University, 1910 University Dr., Boise, ID, 83725, USA., Scott C; Biomolecular Research Center, Boise State University, Boise, ID 83725, USA., Fujimoto K; Micron School of Materials Science and Engineering, Boise State University, 1910 University Dr., Boise, ID, 83725, USA., Brown R; Biomolecular Research Center, Boise State University, Boise, ID 83725, USA., Tanasse E; Department of Mechanical and Biomedical Engineering, Boise State University, 1910 University Dr., Boise, ID, 83725, USA., Oxford JT; Biomolecular Research Center, Boise State University, Boise, ID 83725, USA.; Department of Biological Sciences, Boise State University, Boise, ID 83725, USA., Lujan TJ; Department of Mechanical and Biomedical Engineering, Boise State University, 1910 University Dr., Boise, ID, 83725, USA., Estrada D; Micron School of Materials Science and Engineering, Boise State University, 1910 University Dr., Boise, ID, 83725, USA.; Center for Advanced Energy Studies, Boise State University, 1910 University Dr., Boise, ID, 83725, USA.
Jazyk: angličtina
Zdroj: Advanced engineering materials [Adv Eng Mater] 2018 Sep; Vol. 20 (9). Date of Electronic Publication: 2018 Jun 25.
DOI: 10.1002/adem.201800166
Abstrakt: Graphene foam (GF), a 3-dimensional derivative of graphene, has received much attention recently for applications in tissue engineering due to its unique mechanical, electrical, and thermal properties. Although GF is an appealing material for cartilage tissue engineering, the mechanical properties of GF - tissue composites under dynamic compressive loads have not yet been reported. The objective of this study was to measure the elastic and viscoelastic properties of GF and GF-tissue composites under unconfined compression when quasi-static and dynamic loads are applied at strain magnitudes below 20%. The mechanical tests demonstrate a 46% increase in the elastic modulus and a 29% increase in the equilibrium modulus after 28-days of cell culture as compared to GF soaked in tissue culture medium for 24h. There was no significant difference in the amount of stress relaxation, however, the phase shift demonstrated a significant increase between pure GF and GF that had been soaked in tissue culture medium for 24h. Furthermore, we have shown that ATDC5 chondrocyte progenitor cells are viable on graphene foam and have identified the cellular contribution to the mechanical strength and viscoelastic properties of GF - tissue composites, with important implications for cartilage tissue engineering.
Databáze: MEDLINE