Shear Bond Strength between Fiber-Reinforced Composite and Veneering Resin Composites with Various Adhesive Resin Systems.

Autor: AlJehani YA; Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia., Baskaradoss JK; Department of Community Dentistry, School of Dental Medicine, Case Western Reserve University, Cleveland, OH.; College of Dentistry, King Saud Bin Abdulaziz University for Health Sciences, King Abdulaziz Medical City, Riyadh, Saudi Arabia., Geevarghese A; College of Dentistry, King Saud Bin Abdulaziz University for Health Sciences, King Abdulaziz Medical City, Riyadh, Saudi Arabia., AlShehry MA; College of Dentistry, King Saud Bin Abdulaziz University for Health Sciences, King Abdulaziz Medical City, Riyadh, Saudi Arabia., Vallittu PK; Department of Biomaterials Science and Turku Clinical Biomaterials Centre, Professor and Chair of Biomaterials Science, Director of Turku Clinical Biomaterials Centre - TCBC, Institute of Dentistry, University of Turku, and City of Turku, Welfare Division, Turku, Finland.
Jazyk: angličtina
Zdroj: Journal of prosthodontics : official journal of the American College of Prosthodontists [J Prosthodont] 2016 Jul; Vol. 25 (5), pp. 392-401. Date of Electronic Publication: 2015 Jul 27.
DOI: 10.1111/jopr.12315
Abstrakt: Purpose: The aim of this research was to evaluate the shear bond strength of different laboratory resin composites bonded to a fiber-reinforced composite substrate with some intermediate adhesive resins.
Materials and Methods: Mounted test specimens of a bidirectional continuous fiber-reinforced substrate (StickNet) were randomly assigned to three equal groups. Three types of commercially available veneering resin composites - BelleGlass®, Sinfony®, and GC Gradia® were bonded to these specimens using four different adhesive resins. Half the specimens per group were stored for 24 hours; the remaining were stored for 30 days. There were 10 specimens in the test group (n). The shear bond strengths were calculated and expressed in MPa. Data were analyzed statistically, and variations in bond strength within each group were additionally evaluated by calculating the Weibull modulus.
Results: Shear bond values of those composites are influenced by the different bonding resins and different indirect composites. There was a significant difference in the shear bond strengths using different types of adhesive resins (p = 0.02) and using different veneering composites (p < 0.01). Belle-Glass® had the highest mean shear bond strength when bonded to StickNet substrate using both Prime & Bond NT and OptiBond Solo Plus. Sinfony® composite resin exhibited the lowest shear bond strength values when used with the same adhesive resins. The adhesive mode of failure was higher than cohesive with all laboratory composite resins bonded to the StickNet substructure at both storage times. Water storage had a tendency to lower the bond strengths of all laboratory composites, although the statistical differences were not significant.
Conclusion: Within the limitations of this study, it was found that bonding of the veneering composite to bidirectional continuous fiber-reinforced substrate is influenced by the brand of the adhesive resin and veneering composite.
(© 2015 by the American College of Prosthodontists.)
Databáze: MEDLINE
Externí odkaz: