Zobrazeno 1 - 10
of 355
pro vyhledávání: '"wear scar"'
Publikováno v:
Tribology in Industry, Vol 46, Iss 1, Pp 48-55 (2024)
In today’s paradigm petroleum and petro-based chemical products are being extracted and consumed at a substantial rate, proving to be hazardous and detrimental to the earth. Bio based resources are environmentally friendly, energy efficient, econom
Externí odkaz:
https://doaj.org/article/a79f112bf3b34975acc6e62e7a96f623
Publikováno v:
Tribology in Industry, Vol 45, Iss 3, Pp 457-471 (2023)
The performance loss in industrial equipment due to friction and wear is one of the critical concerns among researchers. This drives the need to develop lubrication fluids that reduce friction to provide extended performance. The global sustainabilit
Externí odkaz:
https://doaj.org/article/e3cb3ba6c56b423aa1fa1102fb3bfad3
Publikováno v:
Zhongguo youzhi, Vol 48, Iss 4, Pp 63-68 (2023)
为考察二聚酸抗磨剂对加氢精制航空煤油润滑性的改善作用，同时验证不同二聚酸抗磨剂的改善效果，分别采用桐油、棉籽油及妥尔油酸为原料进行了二聚酸的合成与精制，利用液相色谱仪
Externí odkaz:
https://doaj.org/article/4f32e88572654cf28b00af8079e1c307
Autor:
Jack Nasr, Diana-Luciana Cursaru
Publikováno v:
Lubricants, Vol 12, Iss 3, p 90 (2024)
Different carbon-based nanomaterials (fullerenes, graphene, SWCNTs, and SWCNT-COOH) were tested as additives in a base mineral oil, SN150; rapeseed oil (RSO); and a 50/50 by volume blend of the two using an HFRR (high-frequency reciprocating rig) tes
Externí odkaz:
https://doaj.org/article/f5a102e2e68b4ae896966da7a4ccfb72
Publikováno v:
Automotive Experiences, Vol 6, Iss 3 (2023)
Tribological properties are crucial for air-conditioning system performance. The properties can be improved using nanolubricant. However, the effect of the binary ratio of hybrid nanolubricants on the tribological performance of automotive systems is
Externí odkaz:
https://doaj.org/article/0ae3f3aba9ca49e8b8b7873631575a6a
Publikováno v:
Jixie chuandong, Vol 46, Pp 100-104 (2022)
In order to explore the stress distribution of steel wire in the strand when the curved steel rope is in contact with continuous and discontinuous grooves， taking the 6×19+IWS right cross-twisted steel rope as the research object， the finite ele
Externí odkaz:
https://doaj.org/article/9c0e39f87bce4a34afd74c748c963588
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
Jixie qiangdu, Vol 43, Pp 1498-1503 (2021)
In this paper, the 3-D model of discontinuous contact of 2/3 lay length steel rope is established by ProE/5.0. Finite element analysis of discontinuous contact steel rope under axial tension and torsion load was carried out in ABAQUS. The wear test o
Externí odkaz:
https://doaj.org/article/ec0ab63e7705471baf550c415a0cf409
Publikováno v:
Tribology in Industry, Vol 42, Iss 3, Pp 494-502 (2020)
Minimizing friction and wear in between mating parts is the main concern in the field of tribological studies. Lubricants with improved tribological properties are continuously explored for minimizing friction and wear. In the present work, an attemp
Externí odkaz:
https://doaj.org/article/96ed09a48a5c4a4d9d24cef298a6b5d4
Publikováno v:
Tribology Online, Vol 15, Iss 4, Pp 251-258 (2020)
The aim of this study is to investigate the effects of applied loads and temperatures on the tribological properties of MBS oil, which is a bio-oil extracted from banana peel waste of Musa Aluminata Balbisiana, MBS. Tribological evaluation of MBS oil
Externí odkaz:
https://doaj.org/article/2d1f059b3f3d43e7a89b8ada94b044b0