Zobrazeno 1 - 10
of 827
pro vyhledávání: '"the bonding interface"'
Publikováno v:
Journal of Materials Research and Technology, Vol 33, Iss , Pp 2530-2537 (2024)
Electrodeposited -oriented nanotwinned Cu (NT-Cu) films consist of micron-scale columnar grains and they are thermally stable up to 400 °C. By adding nanoscale equiaxed Cu grains at the bottom of the NT-Cu films, anisotropic large grain growth could
Externí odkaz:
https://doaj.org/article/d667619980ce45238568fcbc230a23ac
Publikováno v:
Frontiers in Materials, Vol 11 (2024)
The wooden arch corridor bridge is a typical representative of Chinese wooden bridges, holding significant historical research value. Currently, these bridges face issues of severe component deformation and insufficient load-bearing capacity. To addr
Externí odkaz:
https://doaj.org/article/35a97d83149a4372aba8bf699775d8bc
Autor:
Lei Zhu, Qiang Zhou, Congbin Song, Linjie Liu, Linjie Zhang, Keshe Fan, Yudong Zhang, Honghong Lu, Qiwen Hu, Zemin Sheng, Yansong Guo, Kaiyuan Liu
Publikováno v:
Journal of Materials Research and Technology, Vol 28, Iss , Pp 668-682 (2024)
Copper/stainless steel composite is often used for preparation of superconducting busbar “double box” lap joints. However, it is a challenge for the large thickness T2 copper/316L stainless steel composite is fabricated by explosive welding, beca
Externí odkaz:
https://doaj.org/article/1a91523c8733435983b53946a1c3e253
Publikováno v:
Materials & Design, Vol 241, Iss , Pp 112923- (2024)
Hot-compression bonding (HCB) as an advanced technique for preparation of large-size homogenized components is widely applied. Despite the fact that interfacial healing mechanisms during HCB have been extensively investigated, the interfacial healing
Externí odkaz:
https://doaj.org/article/9ba1795ba3e942cdaec38fcc4501046e
Publikováno v:
Archives of Metallurgy and Materials, Vol vol. 68, Iss No 3, Pp 939-946 (2023)
The stainless steel/aluminum multilayer composites were prepared by one-step explosive welding using ammonium nitrate explosive with two different thicknesses. The microstructure and mechanical properties of the multilayer composites were examined. T
Externí odkaz:
https://doaj.org/article/c0cc8c5b88f340d5b323abf70e0eccd0
Publikováno v:
Reviews on Advanced Materials Science, Vol 63, Iss 1, Pp id. 106559-11375 (2024)
Multilayer adhesive bonded structures/materials (MABS) are widely used as structural components, especially in the field of aerospace. However, for MABS workpieces, the facts that the weak echo of the deep interfacial debonding defects (DB) caused by
Externí odkaz:
https://doaj.org/article/d021e312c2364ee994e162d44428c873
Quasi-direct Cu–Si3N4 bonding using multi-layered active metal deposition for power-module substrate
Autor:
Hiroaki Tatsumi, Seongjae Moon, Makoto Takahashi, Takahiro Kozawa, Eiki Tsushima, Hiroshi Nishikawa
Publikováno v:
Materials & Design, Vol 238, Iss , Pp 112637- (2024)
The advancement of power modules demands more reliable insulating circuit substrates. Traditional substrates, comprising Cu and Si3N4, are produced using active metal brazing (AMB). However, AMB substrates have reliability concerns owing to electroch
Externí odkaz:
https://doaj.org/article/d029dab47bb749a3a8e5ea4cf40c44bd
Publikováno v:
Nuclear Materials and Energy, Vol 36, Iss , Pp 101482- (2023)
Divertor components with excellent comprehensive performance are a new research focus for nuclear fusion reactors. However, the excessive mismatch in the coefficient of thermal expansion (CTE) between W and Cu poses a challenge for their application
Externí odkaz:
https://doaj.org/article/572379f36f974430a3bce63665c0cbfc
Publikováno v:
Case Studies in Construction Materials, Vol 19, Iss , Pp e02666- (2023)
Engineered Cementitious Composite (ECC) has received much attention due to its excellent properties of tension strain-hardening and multiple-cracking. Considering the full utilization of ECC properties and optimal cost, a kind of ECC-NC (normal concr
Externí odkaz:
https://doaj.org/article/7753e667f7c444c0ba5d245a61aeab2e
Publikováno v:
口腔疾病防治, Vol 31, Iss 1, Pp 23-27 (2023)
Objective To study the effect of nonthermal argon atmospheric pressure plasma (NTAPP) treatment on the bonding strength between dentine and self-etch adhesive and the wettability of dentine surfaces under different treatment times. Methods The plasma
Externí odkaz:
https://doaj.org/article/971a8a2e89e4436c8ad7dbd87c0b67c2