Zobrazeno 1 - 10
of 2 302
pro vyhledávání: '"non woven"'
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-15 (2024)
Abstract An investigation into Cu(II) adsorption from contaminated water utilizing a trickle tray column that has been upscaled from batch-scale adsorption was performed to understand the efficacy of the adsorbent when used in a continuous system—w
Externí odkaz:
https://doaj.org/article/82b1942e70104938870f6f07295262d5
Publikováno v:
Applied Water Science, Vol 14, Iss 11, Pp 1-19 (2024)
Abstract This study evaluated the efficiency of an on-site household greywater treatment system for indirect human reuse and for domestic lawn irrigation. This helps in the reduction in the disparity between water demand and supply that is facing the
Externí odkaz:
https://doaj.org/article/85f09bee1c114cf59fea0c987da6f15e
Publikováno v:
Advances in Bamboo Science, Vol 8, Iss , Pp 100096- (2024)
This study investigates the development of eco-composite panels using treated and untreated nonwoven polypropylene (PP) extracted from disposable medical face masks, reinforced with bamboo particles. Treated PP underwent a washing process with deterg
Externí odkaz:
https://doaj.org/article/af6c89562be2435ca88c722d08819497
Autor:
Olga V. Kozhevnikova, Elena S. Bokova, Alexander V. Dedov, Viktor G. Nazarov, Leonid A. Ivanov
Publikováno v:
Нанотехнологии в строительстве, Vol 16, Iss 1, Pp 22-31 (2024)
Introduction. The objective of this study is to examine the impact of the impregnation (with the aliphatic polyurethane water dispersion) degree on the deformation properties of the polyacetal, polyethylene terephthalate and polypropylene fibers base
Externí odkaz:
https://doaj.org/article/37c80cc5ea5d4972be6c31d036a63f49
Publikováno v:
Micromachines, Vol 15, Iss 11, p 1390 (2024)
The efficient cutting of non-woven fabric shows great significance to the development of the textile industry. In recent years, laser cutting technology has been widely applied in the clothing industry due to its high efficiency and cutting quality.
Externí odkaz:
https://doaj.org/article/0c9b23ffc885411085c89ec19b4be03a
Autor:
Shavini Stuart, Margreet de Kok, Ben O’Searcoid, Hannah Morrisroe, Irina Bianca Serban, Ferry Jagers, Remon Dulos, Steven Houben, Linda van de Peppel, Jeroen van den Brand
Publikováno v:
Bioengineering, Vol 11, Iss 11, p 1058 (2024)
The commercialization of a growing number of wearable devices has been enabled within recent years due to the availability of miniaturized sensor modalities, the development of new materials, and the scalability of flexible electronics. With the incr
Externí odkaz:
https://doaj.org/article/de77f874f64a4a7e876320ff4f57fe86
Publikováno v:
Heliyon, Vol 10, Iss 10, Pp e30845- (2024)
Recently, textile materials used for wearable flexible sensors have received much attention. Wearable textile based triboelectric nanogenerator (TENG) not only has unique advantages in mechanical energy harvesting, but also has application value in t
Externí odkaz:
https://doaj.org/article/61b6d2151b4043de86227237155da339
Publikováno v:
Macromolecular Materials and Engineering, Vol 309, Iss 4, Pp n/a-n/a (2024)
Abstract The laydown of aerodynamically stretched fibers during fiber spinning is a key feature of the non‐woven quality. The desired properties of the produced non‐woven are mostly determined by the mechanical properties of the single fiber and
Externí odkaz:
https://doaj.org/article/13b8171eb8bd42be98aedce54d067325
Publikováno v:
Buildings, Vol 14, Iss 10, p 3105 (2024)
The long-term use of air filters causes dust to accumulate on their surfaces or fill in the fibers of their internal filtering materials over time, thereby greatly reducing their effectiveness; therefore, the cleaning and replacement of air filter ma
Externí odkaz:
https://doaj.org/article/f70a42cc7e9f463aa2cb53fd8db6da7b
Autor:
Natalin Michele Meliande, Michelle Souza Oliveira, Artur Camposo Pereira, Filipe D'Mengeon Pedreiro Balbino, André Ben-Hur da Silva Figueiredo, Sergio Neves Monteiro, Lucio Fabio Cassiano Nascimento
Publikováno v:
Journal of Materials Research and Technology, Vol 25, Iss , Pp 3943-3956 (2023)
The present research aimed to develop laminated hybrid-composite with aramid woven fabric and curaua non-woven mat, to evaluate the possibility of using as military ballistic helmets. It explores the potential of hybrid solutions, which are more soci
Externí odkaz:
https://doaj.org/article/172a383da64f4a31bdb31423f2192db8