Zobrazeno 1 - 10
of 526
pro vyhledávání: '"mineral filler"'
Publikováno v:
Taiyuan Ligong Daxue xuebao, Vol 55, Iss 3, Pp 503-512 (2024)
Purposes The effects of different mineral fillers and their compound ratio on the properties of water-based ultra-thin fireproof coatings are worth studying. Methods Aqueous epoxy/acrylic composite emulsion was used as film material. Ammonium polypho
Externí odkaz:
https://doaj.org/article/5bbc982f2283432a953fd0fc3bc186dc
Autor:
Nihat MOROVA
Publikováno v:
Medžiagotyra, Vol 30, Iss 1, Pp 96-105 (2024)
I In the scope of the study, the use of waste phonolite (PW) obtained from phonolite wastewater formed during the processing of phonolite stone blocks as filler in hot-mix asphalt (HMA) was investigated. For this purpose, samples were produced with
Externí odkaz:
https://doaj.org/article/edcc321a0dd94bdfa783ee654491b358
Autor:
Azamat Taurbekov, Bayan Kaidar, Akniyet Baltabay, Aigerim Imash, Weon-Bae Ko, Jeong-Won Ko, Meiram Atamanov, Zulkhair Mansurov, Gaukhar Smagulova
Publikováno v:
Applied Sciences, Vol 14, Iss 15, p 6680 (2024)
This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment foll
Externí odkaz:
https://doaj.org/article/b62d1ab2fdb94466a272d7491524325a
Publikováno v:
Materials, Vol 17, Iss 14, p 3511 (2024)
Asphalt pavements are fundamental to modern transportation infrastructure, requiring elasticity, firmness, and longevity. However, traditional asphalt, based on bitumen, faces several limitations. To improve pavement performance, polymer resins are b
Externí odkaz:
https://doaj.org/article/e8b99eac0a0f43c29650060873ca542c
Autor:
Laila M. Kalimoldina, Sandugash O. Abilkasova, Saule O. Akhmetova, Mariya Sh. Suleimenova, Zhanat E. Shaikhova
Publikováno v:
Journal of Composites Science, Vol 8, Iss 7, p 284 (2024)
This article presents the results of research on the development of chemically resistant polymer–mineral casting composites based on industrial waste. The aim of this work is to develop a technological basis for obtaining effective inorganic filler
Externí odkaz:
https://doaj.org/article/5877451be0a646f9885d47c8d4aa8051
Publikováno v:
Вестник СибАДИ, Vol 20, Iss 1, Pp 150-157 (2023)
Introduction. One of the problems of developing new generation concrete is to ensure the rational granulometric composition of a mixture of cement and fine additives to ensure the densest packing of all particles of the cement system. In this regard,
Externí odkaz:
https://doaj.org/article/c6d13d6beda2436e9fe50c49a7b177ab
Publikováno v:
Дороги і мости, Iss 26, Pp 36-47 (2022)
Introduction. Mineral filler is an important component of asphalt mixture which plays an important role in ensuring the quality of asphalt mixtures. The specific surface of mineral filler is about 90 % of the specific surface of aggregates in asphalt
Externí odkaz:
https://doaj.org/article/de7be62ecf8b43fdaf24c4f96a636af2
Publikováno v:
Вестник СибАДИ, Vol 19, Iss 4, Pp 584-596 (2022)
Introduction. The article presents the production results for binder compositions of the optimal proportion based on Portland cement and claydite waste – claydite dust. The granulometric composition studies have been conducted, test results for bin
Externí odkaz:
https://doaj.org/article/4f238c03f65a44d1aac377f91ab1303a
Autor:
Murat Canpolat, Nihat Morova, Suna Çetin, Ahmet Beycioglu, Hatice Merve Çetin, Hüseyin Gündoğan
Publikováno v:
Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol 10, Iss 2, Pp 555-566 (2022)
Bu çalışmada ferrokrom tesislerinde kromit cevherinin zenginleştirilmesi sürecinde ortaya çıkan atık olivin malzemesinin esnek üstyapılarda filler olarak kullanılabilirliği araştırılmıştır. İlk aşamada geleneksel kırmataş kalker
Externí odkaz:
https://doaj.org/article/c3f40c95f49a4df5a616bd63ba59e44e
Autor:
Justyna Stępień, Eva Remišová
Publikováno v:
Materials, Vol 16, Iss 19, p 6490 (2023)
Hot- and cold-applied joint sealants are materials commonly used for the surface repairs of the upper layers of asphalt or concrete road surfaces. Our investigations covered six hot-applied joint sealants, classified as the high-extension type N1 (el
Externí odkaz:
https://doaj.org/article/8fe0117a91a34fbd933c8ac137b6e5be