Zobrazeno 1 - 10
of 409
pro vyhledávání: '"diagonal compression"'
Publikováno v:
Materiales de Construccion, Vol 74, Iss 354 (2024)
The objective of this study is to present a new method of reinforcing masonry using layers of mortar reinforced with short jute fibers. Mortars were produced with 0%, 2% and 3% jute fibers with cementitious matrices free of calcium hydroxide. The eff
Externí odkaz:
https://doaj.org/article/44db46242ba1483c831acade7c1facd9
Autor:
Marta Kałuża
Publikováno v:
Archives of Civil Engineering, Vol vol. 69, Iss No 2, Pp 97-110 (2023)
The use of FRP materials as external reinforcement of masonry structures has been recognized as an effective and minimally invasive method ofwall strengthening. The available literature and research reports confirmthe positive effect of the strip-lik
Externí odkaz:
https://doaj.org/article/60dec7a67d874662b3fb48e49f140637
Publikováno v:
Buildings, Vol 14, Iss 6, p 1629 (2024)
This paper introduces a novel type of connection that integrates unbonded prestressed strands (UPS) and mortise-tenon in an assembly frame structure (UPS-MTF). First, the damage process and failure modes of the joints under reciprocating horizontal l
Externí odkaz:
https://doaj.org/article/54d9f9d3adc7439fb9a591c0e3992472
Autor:
Panuwat Joyklad, Qudeer Hussain
Publikováno v:
Results in Engineering, Vol 18, Iss , Pp 101103- (2023)
The low cost of cement-clay interlocking (CCI) bricks is an attractive feature, resulting in a wide utilization of CCI bricks in the construction of masonry walls. Despite this, an experimental database on the performance of CCI brick walls is scarce
Externí odkaz:
https://doaj.org/article/c8c452a82bbb4bbe8fba454d1122597f
Autor:
Elena Ferretti
Publikováno v:
Buildings, Vol 13, Iss 12, p 3027 (2023)
Among all the active confinement techniques, the use of pre-tensioned stainless steel straps has recently gained much attention. The flexibility of the stainless steel straps allows us to bend and pass them through the thickness of the masonry, thus
Externí odkaz:
https://doaj.org/article/bce868ec47194f42af08b67ef85a04f0
Autor:
Elena Ferretti
Publikováno v:
Buildings, Vol 14, Iss 1, p 104 (2023)
This paper is the continuation of a previous study, which highlighted some inconsistencies in the RILEM guidelines for the interpretation of the diagonal compression test. Although improved compared to the ASTM guidelines, in fact, the RILEM guidelin
Externí odkaz:
https://doaj.org/article/6a583179666d4e80b5c3372e7eb99b9a
Publikováno v:
SN Applied Sciences, Vol 3, Iss 11, Pp 1-10 (2021)
Abstract To learn the characteristics of a cross-laminated timber (CLT) panel, it is crucial to perform experimental tests. This study presents two experimental test methods to measure the in-plane shear modulus of CLT panels. This characteristic can
Externí odkaz:
https://doaj.org/article/9da6a7fc82364b9f94892906a589247c
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
Athanasia K. Thomoglou, Martha A. Karabini, Dimitra V. Achillopoulou, Theodoros C. Rousakis, Constantin E. Chalioris
Publikováno v:
Fibers, Vol 11, Iss 6, p 53 (2023)
The brittle failure of unreinforced masonry (URM) walls when subjected to in-plane loads present low shear strength remains a critical issue. The investigation presented in this paper touches on the retrofitting of URM structures with textile-reinfor
Externí odkaz:
https://doaj.org/article/4e72753e61fd4f0998df3103664632f0