Zobrazeno 1 - 10
of 2 752
pro vyhledávání: '"depth of cut"'
Autor:
Muni Tanuja Anantha, Sireesha Koneru, Parameshwaran Pillai Thiruvambalam Pillai, Nageswara Rao Boggarapu, Tanya Buddi, Kseniia Iurevna Usanova, Rajesh Deorari
Publikováno v:
Cogent Engineering, Vol 11, Iss 1 (2024)
The motive of this study is to evaluate the machinability properties of AZ31 Mg alloy in the face milling operations. Depth of cut, rate of feed and speed of cut are three input variables in the face milling process, while surface roughness (Ra) and
Externí odkaz:
https://doaj.org/article/a1bcad5477f244bbb191fbdc77f65390
Publikováno v:
Meitan xuebao, Vol 49, Iss S1, Pp 208-219 (2024)
Abrasive water jet is a highly efficient cutting technology. Through some sandstone cutting tests, the research on the optimal impact angle and inclined cutting mechanism of rock-like materials is carried out. Based on the macroscopic and microscopic
Externí odkaz:
https://doaj.org/article/bf640c08c34045678dbedf1b3caeed68
Autor:
Hasan Talić, Atif Hodžić
Publikováno v:
Drvna Industrija, Vol 75, Iss 1, Pp 79-85 (2024)
The roughness of the machined surface is a crucial factor in the woodworking process because it influences the quality of future operations like gluing, sanding, pressing, surface treatment and protection, and assembly. The quality of the machined su
Externí odkaz:
https://doaj.org/article/94cdb9adb48b44c0b53ee7697c97da1b
Autor:
E. Obojoh, T. I. Francis-Akilaki
Publikováno v:
Journal of Applied Sciences and Environmental Management, Vol 28, Iss 4 (2024)
The objective of this paper was to evaluate the effect of some cutting parameters on surface finish of bright mild steel (BMS). Samples were cut into the required piece with dimension 50mm x 200mm and the turning operation done using a tungsten carbi
Externí odkaz:
https://doaj.org/article/c1b8dd93e8a445d9996d31b6d9fb48e3
Publikováno v:
Engineering and Technology Journal, Vol 41, Iss 12, Pp 1594-1610 (2023)
Hybrid Electrochemical Discharge Machining (ECDM) streamlines the manufacturing process for challenging materials. Tungsten carbide (WC) is widely recognized as a formidable material due to its exceptional hardness and its ability to maintain hardnes
Externí odkaz:
https://doaj.org/article/90dd235afbe34b91987e14f027bc4270
Autor:
Mohsen Sabzalipour, A.M. Rashidi
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 6928-6941 (2023)
The main goal of present paper is to highlight the influence of type of hard phase at different volume fraction onto the cutting force of dual matrix structure ductile iron (DMS-DI) in order to achieve the DMS-DI articles having the suitable machinin
Externí odkaz:
https://doaj.org/article/c9df3b2d35dd45baaefe5778e64c43b2
Publikováno v:
Heliyon, Vol 9, Iss 12, Pp e22738- (2023)
Appropriate choice of machining conditions contributes directly to improved performance of the machining process. Cooling and lubricating the grinding surface in the machining process has been done using different methods, but each method has its own
Externí odkaz:
https://doaj.org/article/c183bb956b4d4a0bbd24aa8c9d446158
Autor:
Sadredine Abainia
Publikováno v:
FME Transactions, Vol 51, Iss 3, Pp 284-297 (2023)
During the peripheral milling process, great transverse displacement vibrations of the thin-walled part are occurred under the acting of milling tool edge forcesdue to their low dynamic rigidity and the radial depth of cut ae variations. In this work
Externí odkaz:
https://doaj.org/article/e4b3442d89914e00be40d8e7955a669c
Publikováno v:
SN Applied Sciences, Vol 5, Iss 1, Pp 1-8 (2022)
Article highlights • Experiments were conducted for Aluminum material AA7075 considering end milling. • Various process parameters have been studied for the above material to study its effect on surface roughness. • Optimization of the process
Externí odkaz:
https://doaj.org/article/8532cf782a1746daa747c0c751c7323b
Publikováno v:
International Journal of Lightweight Materials and Manufacture, Vol 5, Iss 4, Pp 528-542 (2022)
Magnesium (Mg) alloys are popular in the aerospace and automotive sector owing to their light-weight aspects. Amongst various Mg alloys, AZ91 alloy behaviour under machining has been trending and needs to be completely explored. The selection of opti
Externí odkaz:
https://doaj.org/article/b2b8db78387d4afab732ceaf983ae708