Zobrazeno 1 - 10
of 1 926
pro vyhledávání: '"cold forming"'
Autor:
Suman Pradhan, Mostafa Mohammadabadi, Edward D. Entsminger, Kevin W. Ragon, Laya Khademibami, Jason T. Street
Publikováno v:
BioResources, Vol 18, Iss 3, Pp 4666-4675 (2023)
A wood-based sandwich panel with a corrugated core was developed as a building material. A matched-die mold manufactured from commercial plywood was used to fabricate the corrugated panels through a cold-forming process. A cold-setting resin was appl
Externí odkaz:
https://doaj.org/article/34b9aef58fcc497f8f770bd32d1222e9
Publikováno v:
Metals, Vol 14, Iss 5, p 512 (2024)
A proposed low-temperature forging method is presented to enhance stainless steel bearings by creating a martensitic subsurface layer, significantly boosting bearing fatigue life due to increased surface hardness. This technique induces beneficial re
Externí odkaz:
https://doaj.org/article/f75754206ee249a4bc9744900d155ec0
Autor:
Hugo Estrada-Pimentel, Hugo Arcos-Gutiérrez, José Antonio Betancourt-Cantera, Jan Mayen, John Edison García Herrera
Publikováno v:
Revista de Ciencias Tecnológicas, Vol 6, Iss 4 (2023)
During the cold-bending process, the tooling suffers considerable damage due to excess pressure. This also causes the machines to break down, causing problems in the precision and quality of the metal parts formed. The precision depends on the operat
Externí odkaz:
https://doaj.org/article/430ab6dd09224ae0a7b03835333a7c61
Publikováno v:
BioResources, Vol 18, Iss 2, Pp 3033-3043 (2023)
A wooden matched-die mold was manufactured to develop wood-based corrugated panels. Wood veneers brushed with resin were cold pressed between the mold halves and formed into a corrugated geometry. The corrugated panels were used as a core and bonded
Externí odkaz:
https://doaj.org/article/a4947e894a2f490fba852ce320590f7d
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
Mechanical Engineering Journal, Vol 10, Iss 4, Pp 23-00072-23-00072 (2023)
Cold forming has required considerably superior hard coating on a die to manufacture net-shaped products. Especially, under poor lubrication conditions or a dry condition, the hard coating is indispensable for the success of manufacturing. Accordingl
Externí odkaz:
https://doaj.org/article/08e889520d974cec96d0fe97d9362cf2
Autor:
Thomas Gomes dos Santos, André Rosiak, Diego Rafael Alba, Diego Pacheco Wermuth, Matheus Henrique Riffel, Rafael Pandolfo da Rocha, Lirio Schaeffe
Publikováno v:
Revista de Metalurgia, Vol 59, Iss 1 (2023)
Drawing is a manufacturing process that consists of indirect deformation by pulling the material through a tool with a conical geometry. The process is usually performed at room temperature (cold forming), so the selection of effective lubricants is
Externí odkaz:
https://doaj.org/article/3a6ebd0972504913aa174196ee8692ca
Publikováno v:
Materials & Design, Vol 226, Iss , Pp 111627- (2023)
The goal of this work is to establish a correlation between the surface integrity and magnetic properties of stainless steels like AISI 304 (X5CrNi18-10). In metastable austenitic stainless steels, a phase transformation from the austenitic to the ma
Externí odkaz:
https://doaj.org/article/485af7051fdc43f4982399d0e2cde6c4
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.