Zobrazeno 1 - 10
of 1 016
pro vyhledávání: '"ansys cfx"'
Autor:
Prithesh Pinto, Srinivas G
Publikováno v:
Cogent Engineering, Vol 11, Iss 1 (2024)
This research article focuses on improving the efficiency of an axial flow compressor stage, enhancing the stall margin, and optimizing flow parameters. Utilizing the NACA 65 series rotor airfoil with 12 blades, the study employs numerical simulation
Externí odkaz:
https://doaj.org/article/339cde4baf934698b172bde447b2181b
Publikováno v:
Zernovì Produkti ì Kombìkorma, Vol 24, Iss 2, Pp 39-46 (2024)
The design of metal silos and other structures (towers, silo galleries) of the grain receiving point under the influence of wind load is considered in the work. The positive and negative aspects of the structures of the silos under consideration have
Externí odkaz:
https://doaj.org/article/283f218dcc96484c9dfc1feca4a57323
Publikováno v:
Омский научный вестник: Серия "Авиационно-ракетное и энергетическое машиностроение", Vol 8, Iss 2, Pp 45-51 (2024)
The paper presents the results of influence for manufacturing deviations from the shape of the flow part – cavities obtained during the refinement of the material part of the multistage axial compressor GTE-65.1. An approach to the mathematical d
Externí odkaz:
https://doaj.org/article/3d0b83e64eb347ae8b9ef10da555a90b
Publikováno v:
Vestnik MGSU, Vol 19, Iss 2, Pp 270-280 (2024)
Introduction. The study presents an approach for detecting and identifying the causes of damage to individual key elements of metal structures of the hydroelectric power plant’s trash-rack structure under anthropogenic dynamic impacts. Strength and
Externí odkaz:
https://doaj.org/article/6be9e55440564f3bb5e40cf398f7ad5f
Publikováno v:
Shipin yu jixie, Vol 39, Iss 6, Pp 99-104 (2023)
Objective: To improve the mixing efficiency and working performance of the new twin-screw extruder. Methods: A new twin-screw extruder with embedded planetary gear train and kneading block was designed. A three-dimensional model was established by So
Externí odkaz:
https://doaj.org/article/ef256afb1bd34430a777362711a55ef6
Autor:
Yurii Shashko, Oleksiy Kulyk
Publikováno v:
Авіаційно-космічна техніка та технологія, Vol 0, Iss 5, Pp 64-77 (2023)
The correct choice of technological modes can guarantee the results of inkjet processing. However, the need to consider a significant amount of input data, namely the parameters of the equipment, the abrasive jet, the physical and mechanical properti
Externí odkaz:
https://doaj.org/article/b982bd3fb48e4b3999f353ec5d430019
Publikováno v:
Applied Sciences, Vol 14, Iss 18, p 8468 (2024)
This contribution provides a detailed comparison of the impact of various rheological models on the filling phase of injection molding simulations in order to enhance the accuracy of flow predictions and improve material processing. The challenge of
Externí odkaz:
https://doaj.org/article/c6f69e5b46bf47aebedfc27c1806a8e8
Autor:
Daniel C. M. Cavalcante, Hortência L. F. Magalhães, Severino R. Farias Neto, Ricardo S. Gomez, João M. P. Q. Delgado, Antonio G. B. Lima, Danielle B. T. Vasconcelos, Márcio J. V. Silva, Daniel O. Farias, Suelyn F. A. M. Queiroz, Antonio C. Q. Santos, Thâmmara L. H. Tito, Emmanuel F. M. Silva
Publikováno v:
Membranes, Vol 14, Iss 8, p 171 (2024)
A conventional hydrocyclones is a versatile equipment with a high processing capacity and low maintenance cost. Currently, several studies aim to alter the typical structure of the conventional hydrocyclone in order to modify its performance and purp
Externí odkaz:
https://doaj.org/article/690d7d5a0c3141929202b9a8229d596f
Publikováno v:
Journal of Applied Fluid Mechanics, Vol 16, Iss 10, Pp 2019-2029 (2023)
Pivot weirs are one of the most important structures for regulating the water level in rivers and canals. These weirs are constructed with one or more gates in a row in the waterways. Changing the angle of each gate is done individually with an indep
Externí odkaz:
https://doaj.org/article/fb4b3d49f0274d618368aa1618f9f037
Publikováno v:
e-Prime: Advances in Electrical Engineering, Electronics and Energy, Vol 7, Iss , Pp 100470- (2024)
The use of in-pipe water turbines for small-scale energy harvesting from pipe networks is starting to gain popularity. However, limited research have looked into whether adding helical blade turbines would be feasible with a spherical lift base in a
Externí odkaz:
https://doaj.org/article/e09eb097d1884f1083bf8be3451eb615