Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Zhierwinjay Bautista"'
Autor:
Hyung-Seop Shin, Zhierwinjay Bautista
Publikováno v:
IEEE Transactions on Applied Superconductivity. 29:1-4
Delamination frequently occurs as a result of high transverse tensile stresses caused by fabrication and mechanical and thermal cycles during operation. It is generally known that transverse opening and peeling off are the primary delamination failur
Publikováno v:
IEEE Transactions on Applied Superconductivity. 29:1-5
In this study, the electromechanical properties of the differently sheathed 18 module MgB 2 wires were evaluated under uniaxial tensile loading at 20 K and 2 T. Four kinds of 18 module MgB 2 wire samples with different configurations were used. They
Autor:
Hyung-Seop Shin, Zhierwinjay Bautista
Publikováno v:
IEEE Transactions on Applied Superconductivity. 28:1-5
In various superconducting device applications such as power cables, magnets, and coils, the strain effect on the critical current I c of coated conductor (CC) tapes including magnetic field B and cryogenic temperature T should be understood for a re
Publikováno v:
IEEE Transactions on Applied Superconductivity. 28:1-5
In coil and magnet manufacturing that requires long length 2G coated conductor (CC) tapes, the development of joining methods for CC tapes with zero or low resistance is necessary. Nowadays, although it is said that CC tapes with around 1-km length w
Autor:
Zhierwinjay Bautista, Jae-Hun Lee, Hyung-Seop Shin, Mark Angelo Diaz, Satoshi Awaji, Hidetoshi Oguro
Publikováno v:
IEEE Transactions on Applied Superconductivity. 28:1-4
Transport properties of coated conductor tapes can be affected by stress and strain induced during fabrication, cool-down, and operation. Therefore, it is important to understand the strain/stress dependence of the critical current of the coated cond
Publikováno v:
Progress in Superconductivity and Cryogenics. 18:21-24
The mechanical properties of REBCO coated conductor (CC) wires under uniaxial tension are largely determined by the thick component layers in the architecture, namely, the substrate and the stabilizer or even the reinforcement layer. Depending on dev
Publikováno v:
Progress in Superconductivity and Cryogenics. 18:6-9
Autor:
Seung-Hyun Moon, Hyung-Seop Shin, Jae-Hun Lee, Hunju Lee, Alking Gorospe, Zhierwinjay Bautista
Publikováno v:
IEEE Transactions on Applied Superconductivity. 26:1-5
The architecture of coated conductor (CC) tapes plays an important role in its overall mechanical and electromechanical performance characteristics. In this paper, mechanical and electromechanical properties of single-side brass foil laminated CC tap
Autor:
Hyung-Seop Shin, Zhierwinjay Bautista
Publikováno v:
Superconductor Science and Technology. 32:064004
Publikováno v:
The Review of scientific instruments. 86(8)
In this note, the effectiveness of voltage tap clipping technique was assessed in evaluating the electromechanical properties of high temperature superconductor (HTS) tapes in the aspect of practical device applications. In the four-probe transport I