Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Zdravko Schauper"'
Autor:
Dalibor VIDERŠČAK, Zdravko SCHAUPERL, Krunoslav ORMUŽ, Sanja ŠOLIĆ, Mladen NIKŠIĆ, Diana MILČIĆ, Pavao ORMUŽ
Publikováno v:
Promet (Zagreb), Vol 34, Iss 1, Pp 91-102 (2022)
In this research, field and laboratory testing of three commercially available brake pads with the lowest, mid-dle, and highest price were performed. Complex field testing, where brake pads were tested in real extreme conditions on a loaded van vehic
Externí odkaz:
https://doaj.org/article/f108ff311de145eab5110837aaf11672
Publikováno v:
Tehnički Glasnik, Vol 11, Iss 4, Pp 166-170 (2017)
Properly performed heat treatment can significantly affect final properties of high-speed steels, so the heat treatment parameters are chosen depending on the specific properties of the particular tool. Deep cryogenic treatment is carried out at a te
Externí odkaz:
https://doaj.org/article/9c8eb632d11549589c0f616898c8a447
Autor:
Mateja Šnajdar Musa, Zdravko Schauperl
Publikováno v:
Processing and Application of Ceramics, Vol 7, Iss 2, Pp 63-68 (2013)
Aluminium based metal matrix composites are rapidly developing group of materials due to their unique combination of properties that include low weight, elevated strength, improved wear and corrosion resistance and relatively good ductility. This com
Externí odkaz:
https://doaj.org/article/a8e47a661efc4919b7b975ea0f68fcca
Publikováno v:
Promet (Zagreb), Vol 24, Iss 4, Pp 285-293 (2012)
The paper studies the influence of liquefied petroleum gas as alternative fuel on the condition of the internal combustion engine. The traffic, energy, economic and ecological influence as well as the types of fuel are studied and analyzed in an unbi
Externí odkaz:
https://doaj.org/article/9322debf935d4754b8c52886b310d093
Publikováno v:
Medicinski Glasnik, Vol 6, Iss 2, Pp 235-242 (2009)
Aim To investigate the influence of different cast surface finishingprocess on metal-ceramics bond strength.Methods Six Co-Cr alloy sample groups were cast (Wirobond C,BEGO, Bremen, Germany) and randomly selected for use in oneof the six different fi
Externí odkaz:
https://doaj.org/article/a2bc134060c34b6bac3e4820d5fec1a0
Autor:
Ketij Mehulić,, Asja Čelebić,, Zdravko Schauperl,, Dragutin Komar,, Denis Vojvodić,, Domagoj Žabarović
Publikováno v:
Medicinski Glasnik, Vol 6, Iss 2, Pp 227-234 (2009)
Aim Assessment of flexural strength values of dental base polymersreinforced with different glass fibers (“dental” and “industrial”origin) after performed artificial ageing procedures.Methods Three hundred specimens (dimensions 18 x 10 x 3 mm
Externí odkaz:
https://doaj.org/article/cf7cc6ff15df473987aad4adef68c4bc
Autor:
Ivan Šalinović, Matea Stunja, Zdravko Schauper, Željko Verzak, Ana Ivanišević Malčić, Valentina Brzović Rajić
Publikováno v:
Acta Stomatologica Croatica, Vol 53, Iss 2, Pp 125-131 (2019)
Objectives: to determine the mechanical properties of hybrid and high-viscosity glass ionomer cements. Compressive strength and hardness of three glass ionomer cements (GIC) were measured: Ketac ™ Universal Aplicap ™, EQUIA Fil® and EQUIA FORTE
Externí odkaz:
https://doaj.org/article/3037b6251706490d91a6e7a6dbca1b5f
Autor:
Dalibor Viderščak, Zdravko Schauperl, Matjaž Godec, Črtomir Donik, Irena Paulin, Mario Šercer, Amir Ćatić, Željko Alar, Daniel Pustički
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 6218-6226 (2024)
This research investigates the impact of three process parameters of Laser Powder Bed Fusion (LPBF) - laser power, scanning speed, and base plate preheating temperature on the structure and mechanical properties of the EOS CoCr SP2 dental alloy. The
Externí odkaz:
https://doaj.org/article/bd7975543a004763871637f31ae7e63a
Publikováno v:
Metals, Vol 14, Iss 4, p 435 (2024)
This paper investigates the casting defects of a stainless steel pump impeller manufactured through the sand casting process. The material characterization of austenitic steel AISI 316L was initially carried out, which examined the chemical compositi
Externí odkaz:
https://doaj.org/article/245e2c8408fa414485b4bb473883c5fe
Publikováno v:
Tehnički Glasnik, Vol 13, Iss 3, Pp 213-217 (2019)
High speed steel (HSS) is a very important industrial tool material and has been constantly improved for different wear resistance applications and cutting tools, i.e. drills, milling cutters, hobs and for the cutting tools in which the economical cu
Externí odkaz:
https://doaj.org/article/a1edbe9c82ce418b9af0b5721d988915