Zobrazeno 1 - 10
of 18
pro vyhledávání: '"Zdeněk Padovec"'
Publikováno v:
Philosophical Magazine Letters, Vol 104, Iss 1 (2024)
ABSTRACTThis work focusses on identifying the optimal stacking sequence for composite tubes in mountain bike frames using a data-driven model combined with evolutionary algorithms. The objective is to find a frame that is sufficiently stiff while mee
Externí odkaz:
https://doaj.org/article/9b650f98aa394548b0c695429ff2d917
Publikováno v:
Journal of Mechanical Engineering, Vol 71, Iss 2, Pp 101-108 (2021)
The aim of the study was to predict the fatigue life of metallic bone plates employing SIMULIA fe-safe software. Two materials commonly used for surgical implants were subjected to investigation: 1.4441 (ASTM F138) stainless steel for implants and Ti
Externí odkaz:
https://doaj.org/article/187831801bc542509dca667d56a55cb6
Publikováno v:
Transactions of the VŠB-Technical University of Ostrava, Mechanical Series, Vol 59, Iss 1, Pp 55-58 (2013)
Presented paper deals with comparison of two measurements done in our lab to achieve the value of the springback angle of composite plate with single curvature. Plate consists of carbon fiber and PPS matrix. Springback angle without recrystallization
Externí odkaz:
https://doaj.org/article/ed8ad70b8343474aa6f6a771a7894606
Publikováno v:
Materials and Manufacturing Processes. :1-12
Publikováno v:
Strojnícky časopis - Journal of Mechanical Engineering. 72:247-270
This paper introduces several new approaches to stiffness calculation of the composite beam with a circular cross-section. The paper poses the problem of calculating the stiffness of the fibre-reinforced winded beam and introduces a new way of stiffn
Publikováno v:
Journal of Mechanical Engineering, Vol 69, Iss 3, Pp 27-32 (2019)
The main goal of this work is to provide a composite alternative to an already existing beam which has top hat cross section. The main part of this work is focused on using the finite element method to solve the problem. Firstly, a duralumin version
Autor:
Ivan Kelnar, Ludmila Kaprálková, Pavel Němeček, Miroslav Janata, Jiří Dybal, Jan Svoboda, Zdeněk Padovec, A.M. Abdel-Mohsen
Publikováno v:
Materials Today Communications. 33:104883
Autor:
Petr David, Martin Matušů, Zdeněk Padovec, Milan Růžička, David Blaha, Jan Řezníček, Pavel Růžička
Publikováno v:
Applied and Computational Mechanics, Vol 15, Iss 1, Pp 31-44 (2021)
This study addresses differences in the material properties due to the influence of the printing direction, UV degradation and the use of differently coloured materials. The specimens were manufactured employing PolyJet technology from the Vero mater
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::95650bac5f8fc9a746ce5711da7911d0
http://hdl.handle.net/11025/44867
http://hdl.handle.net/11025/44867
Publikováno v:
Journal of Mechanical Engineering, Vol 67, Iss 2, Pp 85-90 (2017)
Presented work describes the use of algorithm for the computation of thermo-elastic properties of randomly reinforced composite which is based on histogram from image analysis done on ITAM, CAS. Three polished samples from “Bearing” part were ana
Publikováno v:
Mechanics of Composite Materials. 53:149-158
The thermoelastic properties of randomly reinforced composites can be computed with the idealization that a randomly reinforced layer is composed of a large number of thin layers oriented from 0 to 180°. This approach is a modification of the classi