Zobrazeno 1 - 10
of 39
pro vyhledávání: '"Z. Gary Yang"'
Autor:
Z. Gary Yang
Publikováno v:
IEEE Spectrum. 54:36-41
Inside, it's brightly lit and filled with humming machinery, a mammoth futuristic manufactory. Robot arms grab components from bins and place each part with precision, while conveyor belts move the assembled pieces smoothly down production lines. Fin
Autor:
Z. Gary Yang
Publikováno v:
ECS Meeting Abstracts. :402-402
The trends of growing renewable penetration and demand of reliable, flexible, clean and affordable electricity have driven ever increasing interests of electrical energy storage (EES). Applications of EES as utility assets have seen significant growt
Autor:
Fei Ding, Zimin Nie, Xilin Chen, Z. Gary Yang, Ji-Guang Zhang, Daiwon Choi, Young Joon Choi, Jianming Zheng, Wei Wang, Wu Xu
Publikováno v:
Journal of Power Sources. 236:169-174
The commercial Li4Ti5O12 (LTO) is successfully modified by AlF3 via a low temperature process. After being calcined at 400 °C for 5 h, AlF3 reacts with LTO to form a composite material which mainly consists of Al3+ and F− co-doped LTO with small a
Publikováno v:
International Journal of Hydrogen Energy. 36:4549-4556
Chromia-forming ferritic stainless steels find widespread use as interconnect materials in SOFCs at operating temperatures below 800 °C, because of their thermal expansion match and low cost. However, volatile Cr-containing species originating from
Publikováno v:
Surface and Coatings Technology. 201:4436-4441
A new low-cost, nickel clad bipolar plate concept is currently being developed for use in polymer electrolyte membrane fuel cells. Reported in this paper are the details of a powder-pack boronization process that could be used to establish a passivat
Publikováno v:
Advanced Ceramic Coatings and Interfaces: Ceramic Engineering and Science Proceedings, Volume 27, Issue 3
This paper outlines the development of a new low-cost materials concept for polymer electrolyte membrane fuel cells (PEMFCs). Employing the roll bonding process to prepare a nickel clad steel laminate, the thin outer nickel layer is then passivated u
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::616c370239a0af8876b405f19444173b
https://doi.org/10.1002/9780470291320.ch28
https://doi.org/10.1002/9780470291320.ch28
Observations on the oxidation of Mn-modified Ni-base Haynes 230 alloy under SOFC exposure conditions
The commercial Ni-base Haynes 230 alloy (Ni-Cr-Mo-W-Mn) was modified with two increased levels of Mn (1 and 2 wt per cent) and evaluated for its oxidation resistance under simulated SOFC interconnect exposure conditions. Oxidation rate, oxide morphol
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::02fd0e4cdba45c06764baf316bf4cf3c
https://doi.org/10.2172/1052527
https://doi.org/10.2172/1052527
To serve as an interconnect / gas separator in an SOFC stack, an alloy should demonstrate the ability to provide (i) bulk and surface stability against oxidation and corrosion during prolonged exposure to the fuel cell environment, (ii) thermal expan
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5b98a0c7eb1d5a68bf10a90b58a1f3f2
https://doi.org/10.2172/15010553
https://doi.org/10.2172/15010553
Autor:
Xiaoliang Wei, Qingtao Luo, Zimin Nie, Wei Wang, Feng Chen, Baowei Chen, Yuyan Shao, Gordon Xia, Liyu Li, Z. Gary Yang
Publikováno v:
ECS Meeting Abstracts. :384-384
not Available.
Publikováno v:
ECS Meeting Abstracts. :188-188
not Available.