Zobrazeno 1 - 10
of 28
pro vyhledávání: '"Yusuf ÖZÇATALBAŞ"'
Autor:
Türkan KIYMAZ, Yusuf ÖZÇATALBAŞ
Publikováno v:
Gazi Üniversitesi Fen Bilimleri Dergisi, Vol 8, Iss 3, Pp 601-615 (2020)
In this experimental study, the effect of reinforcement ratio and liquid phase sintering on properties of Al6061 matrix B4C particle reinforced Metal Matrix Composite (MMCP) materials produced by hot pressing active sintering method was investigated.
Externí odkaz:
https://doaj.org/article/d5d8a3b263ed4fdeb24f2c6007cdc0db
Publikováno v:
Gazi Üniversitesi Fen Bilimleri Dergisi, Vol 6, Iss 2, Pp 283-293 (2018)
In this study, 4.5 wt. %Cu powder was added to Al powder and mixed for 45 minutes to produce premixed metal powders. Premixed powders were compacted by cold pressing at 20 MPa. After that these samples were pressed at 500℃ under 200 MPa for 30 min
Externí odkaz:
https://doaj.org/article/5c4a8cb2eacc4e3f8d468156663536c8
Publikováno v:
Gazi Üniversitesi Fen Bilimleri Dergisi, Vol 6, Iss 2, Pp 294-307 (2018)
AISI 304 stainless steel plates are widespreadly used in automotive, food and chemical industries. These materials are joined by resistant spot welding. Mechanical properties of resistant spot-welded sheets are changed by using different cooling cond
Externí odkaz:
https://doaj.org/article/774dba1d05bd4b49b14dfca7104726fc
Autor:
Yusuf Özçatalbaş, Deniz Köse
Publikováno v:
Volume: 21, Issue: 3 696-709
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Bu çalışmada, katı hal sinterleme ile üretilen AA6061 matrisli ve farklı B4C parçacık takviye oranlarındaki metal matrisli kompozit (MMKp) malzemelerin özelliklerine süper katı üzeri sıvı faz sinterleme (SKSFS) işlemlerinin etkisi ara
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f0343f273321fed74a3c7c23596c78d3
https://doi.org/10.35414/akufemubid.876449
https://doi.org/10.35414/akufemubid.876449
Autor:
Türkan Kıymaz, YUSUF ÖZÇATALBAŞ
Publikováno v:
SSRN Electronic Journal.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::715990a0f5ba176bd0b1eba96f06bfb3
https://doi.org/10.2139/ssrn.4166718
https://doi.org/10.2139/ssrn.4166718
Autor:
Yusuf Özçatalbaş
“İşlenebilirlik” işlenen malzemenin bir özelliğidir ve ancak malzemenin nitelikleri değiştirilerek işlenebilirliği değiştirilebilir. Bu durum ise, malzemenin kimyasal ve fiziksel özelliklerindeki değişimle sağlanır. Derleme niteli
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0ef26650614a89ecf027a95786c96d91
https://avesis.gazi.edu.tr/publication/details/b7ce5309-4f2c-4e29-bd51-d165e071bbb2/oai
https://avesis.gazi.edu.tr/publication/details/b7ce5309-4f2c-4e29-bd51-d165e071bbb2/oai
Autor:
Yusuf Özçatalbaş, Tuğçe Şahin
Publikováno v:
Volume: 24, Issue: 2 703-710
Politeknik Dergisi
Politeknik Dergisi
Lubricants used in the Powder Metallurgy (PM) method significantly affect the compressibility, flowability and apparent density of metal powder and also strength of sinter parts. In this study, sintered powder metal (P/M) materials were produced by h
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9968d2f0f7bae7ca7643e82da142acd4
https://dergipark.org.tr/tr/pub/politeknik/issue/61515/745113
https://dergipark.org.tr/tr/pub/politeknik/issue/61515/745113
Autor:
Yusuf Özçatalbaş, Türkan Kiymaz
Publikováno v:
Volume: 8, Issue: 3 601-615
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Bu deneysel çalışmada, sıcak presleme aktif sinterleme yöntemi ile üretilen Al6061 matrisli B4C parçacık takviyeli Metal Matrisli Kompozit (MMKp) malzemelerin özelliklerine takviye oranı ve sıvı faz sinterlemenin etkisi araştırılmışt
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::86290ef548236d22bedb160e905eef79
https://avesis.gazi.edu.tr/publication/details/132e76f7-e70a-4e0b-acfb-0b5c0dc4f848/oai
https://avesis.gazi.edu.tr/publication/details/132e76f7-e70a-4e0b-acfb-0b5c0dc4f848/oai
Autor:
Ersin Bahceci, Yusuf Özçatalbaş
Publikováno v:
Volume: 22, Issue: 4 1101-1110
Politeknik Dergisi
Politeknik Dergisi
In the present study, the effect of cell morphology on mechanical properties in metallic foams with Al based closed cells was examined. AlSi8Mg0.8 alloyed metallic foam materials were produced by the Powder Metallurgy (PM) method. The elastic stresse
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::1c235e1d56630809d26af1b9721dc185
https://avesis.gazi.edu.tr/publication/details/52767ee3-d503-4c99-a30c-0d827fcae367/oai
https://avesis.gazi.edu.tr/publication/details/52767ee3-d503-4c99-a30c-0d827fcae367/oai