Zobrazeno 1 - 10
of 58
pro vyhledávání: '"Yuan-Fang Chou"'
Autor:
Shou-I Chen, Ming-Hsiao Lee, Chih-Min Yao, Peir-Rong Chen, Yuan-Fang Chou, Tien-Chen Liu, Yu-Lin Song, Chia-Fone Lee
Publikováno v:
Kaohsiung Journal of Medical Sciences, Vol 29, Iss 3, Pp 133-139 (2013)
We have developed a new finite element (FE) model of human right ear, including the accurate geometry of middle ear ossicles, external ear canal, tympanic cavity, and mastoid cavity. The FE model would be suitable to study the dynamic behaviors of pa
Externí odkaz:
https://doaj.org/article/7393a3197d614a9aaf580c41808ab2b7
Autor:
Fu-ling Yang, Tianxing Man, Kuan-Wen Tung, Sidhant Tiwari, Pei-Shan Chung, Ben Wu, Yuan-Fang Chou, Cong Wu, Pei-Yu Chiou
Publikováno v:
Lab on a Chip. 19:3714-3725
Arbitrary patterning of micro-objects in liquid is crucial to many biomedical applications. Among conventional methodologies, acoustic approaches provide superior biocompatibility but are intrinsically limited to producing periodic patterns at low re
Publikováno v:
Applied Surface Science. 314:1074-1081
Large area (117 mm × 185 mm) gallium-doped zinc oxide (GZO) films are prepared on glass substrates by atmospheric pressure plasma jet (APPJ) technique. The uniformity of material properties, in particular the electrical resistivity, of the deposited
Autor:
Chia Fone Lee, Wei-Zen Chen, Yuan-Fang Chou, Yu Lin Song, Jhong Ting Jian, Tien-Chen Liu, Chih Hua Shih
Publikováno v:
Applied Acoustics. 74:1511-1518
A non-surgical, direct driving hearing device with an actuator placed on the tympanic membrane was designed, fabricated and tested. The actuator consisted of two photodiodes, an aluminum ring, two neodymium iron permanent magnets, two opposing wound
Autor:
Tien-Chen Liu, Peir-Rong Chen, Yuan-Fang Chou, Yu-Lin Song, Shou-I Chen, Chih-Min Yao, Ming-Hsiao Lee, Chia-Fone Lee
Publikováno v:
Kaohsiung Journal of Medical Sciences, Vol 29, Iss 3, Pp 133-139 (2013)
We have developed a new finite element (FE) model of human right ear, including the accurate geometry of middle ear ossicles, external ear canal, tympanic cavity, and mastoid cavity. The FE model would be suitable to study the dynamic behaviors of pa
Publikováno v:
SPIE Proceedings.
A novel ultrasonic horn atomizer is developed for the purpose of obtaining small size droplets at a large flow rate. The ultrasonic horn has a non-monotonically decreasing cross sectional area to provide a large atomizing surface. Consisting of two h
Publikováno v:
Ultrasonics. 52:54-61
A capillary wave was created on a surface by vibrating from the bottom of a container. When the amplitude of the container vibration approached the critical point, called the onset state, the surface broke up and bursted into very small drops on the
Publikováno v:
Applied Acoustics. 72:949-952
Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (Mw) of approximately 6.4 × 104 g/
Publikováno v:
Advanced Materials Research. :787-796
Monodisperse de-ionized water droplets 4.5 μm in diameter have been produced in ultrasonic atomization using micro electro-mechanical system (MEMS)-based three-Fourier horn 1 MHz silicon nozzles. The required electrical drive power and voltage are 1
Publikováno v:
Journal of Biomechanics. 41:3515-3518
A new type of electromagnetic vibration transducer designed to be placed onto the tympanic membrane was developed. The actuator consisted of two photodiodes, two permanent magnets, an aluminum ring, two opposing wound coils, a latex membrane and a Pr