Zobrazeno 1 - 10
of 37
pro vyhledávání: '"Yuan Tai Hsieh"'
Publikováno v:
International Journal of Photoenergy, Vol 2014 (2014)
A two-step electrochemical anodization was used to form the anodic aluminum oxide (AAO) thin films with nanotube arrays of self-organized honeycomb structure. Al foil was anodized in 10% sulfuric acid (H2SO4) and 3% oxalic acid (H2C2O4) at 25°C at c
Externí odkaz:
https://doaj.org/article/86d9c1689c3941108d6b9e164495ff7f
Publikováno v:
Advanced Materials Research. :429-433
0.65(K0.5Bi0.5)TiO3–0.35BaTiO3 (0.65 KBT-0.35 BT3) ceramic was synthesized using a conventional calcination process (CC-process), and using a two-step calcination process that combined hydrothermal and CC processes (HT-CC-process). The effects of t
Publikováno v:
Mathematical Problems in Engineering, Vol 2014 (2014)
A balun-bandpass filter was proposed by using two folded open-loop ring resonators (OLRRs) to couple three microstrip lines. By tuning the size of the OLRR, the operating frequency of the balun-bandpass filter could be tuned to the needed value. By t
Publikováno v:
Key Engineering Materials. :1115-1118
Aluminum Oxide microwave dielectric ceramics exhibit good microwave dielectric characteristics and suitable be used in the microwave devices. In this letter, using screen-printing technique and Ag/Pd paste, a novel dual-mode 2.4 GHz microstrip bandpa
Publikováno v:
Ceramics International. 38:223-227
TiO 2 thin films were prepared by RF magnetron sputtering onto glass substrates and tungsten was deposited onto these thin films (deposition time 15–60 s) to form W–TiO 2 bi-layer thin films. The crystal structure, morphology, and transmittance o
Publikováno v:
Advanced Materials Research. :1867-1870
Sr0.6Ba0.4Nb2O6 (SBN) thin films were prepared by radio frequency (RF) sputtering onto the SiO2/Si/Al and Pt/Ti/Si substrates to form the MFIS and MFM structures. Their deposition rates increased with decreasing oxygen concentration and with increasi
Autor:
Chang Fu Yang, Wen Cheng Tzou, Ying Hsun Lin, Yuan Tai Hsieh, Ping-Shou Cheng, Kuang Tao Wang, Chia-Ching Wu
Publikováno v:
Advanced Materials Research. :981-985
0.95 (Na0.5Bi0.5)TiO3-0.05 BaTiO3 (NBT-BT3) compositions with excess x wt% Bi2O3 (NBT-BT3-x, with x=0, 1, 2, and 3) are sintered at 1200°C. When excess Bi2O3 is added, the NBT-BT3-1 ceramic displays the largest grain sizes, after which the grain siz
Publikováno v:
Innovation in Design, Communication and Engineering ISBN: 9780429226410
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::655f9b7a870d1ed771f28d98127d6788
https://doi.org/10.1201/b18737-22
https://doi.org/10.1201/b18737-22
Publikováno v:
Materials Letters. 57:1471-1476
Samples of 6 wt.% MgO–CaO–Al 2 O 3 –SiO 2 (MCAS) glass-fluxed Ba(Mg 1/3 Ta 2/3 )O 3 ceramics are investigated, and its sintering and microwave dielectric properties are measured. The densification of the MCAS-fluxed Ba(Mg 1/3 Ta 2/3 )O 3 cerami
Publikováno v:
Ceramics International. 29:495-498
The influence of Ti 4+ substitution on the dielectric properties of Sr(Bi 2 Ta 2 ) 1− x Ti 4 x O 9 (SBTT) ceramics ( x up to 0.2) has been studied. The sintering temperature of SBTT slightly decreases as the TiO 2 content increases with the partial