Zobrazeno 1 - 10
of 35
pro vyhledávání: '"Yoo-Jae Kim"'
Publikováno v:
Buildings, Vol 13, Iss 8, p 1896 (2023)
This paper presents a finite element analysis of the bi-directional orthogonal model, which incorporates individual crack strain separation and tracking. The objective of this research is to expand the current shear friction model to manage bi-direct
Externí odkaz:
https://doaj.org/article/4cdf772eddc3467e9f4271843b07bd76
Publikováno v:
Applied Sciences, Vol 9, Iss 10, p 2008 (2019)
Geosynthetics is a crucial mechanism in which the earth structures can be mechanically stabilized through strength enforcing tensile reinforcement. Moreover, geosynthetic reinforcement stabilizes steep slopes through incorporating the polymeric mater
Externí odkaz:
https://doaj.org/article/b7a04400090b4ae7bbfe5e5ff6159334
Publikováno v:
Advances in Civil Engineering, Vol 2010 (2010)
Fiber reinforced aerated lightweight concrete (FALC) was developed to reduce concrete's density and to improve its fire resistance, thermal conductivity, and energy absorption. Compression tests were performed to determine basic properties of FALC. T
Externí odkaz:
https://doaj.org/article/7fad7c7eae8547428cf768360c5fb550
Publikováno v:
Materials
Volume 14
Issue 6
Materials, Vol 14, Iss 1460, p 1460 (2021)
Volume 14
Issue 6
Materials, Vol 14, Iss 1460, p 1460 (2021)
There are a multitude of existing material models for the finite element analysis of cracked reinforced concrete that provide reduced shear stiffness but do not limit shear strength. In addition, typical models are not based on the actual physical be
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d1ffd06a43732972f6c174f1740b486c
Autor:
Jeong-Yoon Kim, Yoo-Jae Kim
Publikováno v:
Journal of Next-generation Convergence Information Services Technology. 7:15-32
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::97b26ee920381064561ea2f5248d5a72
https://doi.org/10.29056/jncist.2018.06.02
https://doi.org/10.29056/jncist.2018.06.02
Publikováno v:
Advances in Materials Science and Engineering, Vol 2018 (2018)
To successfully process concrete, it is necessary to predict and control its flow behavior. However, the workability of concrete is not completely measured or specified by current standard tests. Furthermore, it is only with a clear picture of cement
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a53abeae2cf64966795365eb388d629d
Publikováno v:
Volume: 3, Issue: 1 138-155
Journal of Sustainable Construction Materials and Technologies
Journal of Sustainable Construction Materials and Technologies, Vol 3, Iss 1, Pp 138-155 (2018)
Journal of Sustainable Construction Materials and Technologies
Journal of Sustainable Construction Materials and Technologies, Vol 3, Iss 1, Pp 138-155 (2018)
Concrete is the corner stone of the construction industry and the second largest material being used after water. The growth of theconstruction industry and an increasing awareness of the environmental impact of human activity has accelerated thedeve
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d1c4fe54e21cc1029bc5ac056af14a74
https://dergipark.org.tr/tr/pub/jscmt/issue/35666/417608
https://dergipark.org.tr/tr/pub/jscmt/issue/35666/417608
Publikováno v:
Magazine of Concrete Research. 66:1075-1083
Part I of this paper presents experimental results for confined concrete in the form of stress–strain relationships. It seeks to determine the behaviour of confined concrete incorporating variable crack angle and void strain to verify the model. Pa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c3b79e40a2e45ab613bdb6cd1a100cc2
https://doi.org/10.1680/macr.14.00012
https://doi.org/10.1680/macr.14.00012
Publikováno v:
Magazine of Concrete Research. 66:967-974
This study investigates shear transfer across a definite plane, which must be considered in the formation of the crack opening path as discussed in the companion paper, Part I. Experimental investigation of the shear friction coefficient for a wide d
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8093e856ac5998b951b3930db00336dd
https://doi.org/10.1680/macr.14.00013
https://doi.org/10.1680/macr.14.00013
Publikováno v:
Fibers and Polymers. 15:1197-1201
Hot embossing is one of the most popular fabrication methods to replicate polymer microdevices in the field of micro-fluidics and micro-optics. Numerical models for hot embossing were constructed to analyze the advance of flow front of the molten pol
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4a6b75dcc4c042ecb18bef9ad4c791db
https://doi.org/10.1007/s12221-014-1197-5
https://doi.org/10.1007/s12221-014-1197-5