Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Yong Fa Diao"'
Publikováno v:
Journal of Engineered Fibers and Fabrics, Vol 19 (2024)
Stenters play a crucial role in the post-treatment of fabric dyeing and finishing, which is mainly used for drying and heat setting. However, the influence of the orifice structure on the heat-moisture distribution characteristics of the fabric surfa
Externí odkaz:
https://doaj.org/article/c9f3cb1d1501453ca839452f1ed796e3
Publikováno v:
Case Studies in Thermal Engineering, Vol 51, Iss , Pp 103600- (2023)
The problems of fluid flow, heat transfer and mass transfer involved in the process of impinging jet belt transportation are very common in engineering applications. However, the array jet forms thermal disturbances on the moving impact surface, whic
Externí odkaz:
https://doaj.org/article/b36165f894bc47c2a306a4411e57826f
Autor:
Huan Wang, Yong Fa Diao
Publikováno v:
Advanced Materials Research. :1212-1216
As to figure out the effect that modified fly ash, which is prepared by fly ash –CaO, and modified fly ash dust layer attached on the surface of the filter material adsorbed elemental mercury, experimental studies are administrated in a laboratory-
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5006bbacc2c34ec714049c32372f8dfe
https://doi.org/10.4028/www.scientific.net/amr.393-395.1212
https://doi.org/10.4028/www.scientific.net/amr.393-395.1212
Publikováno v:
Advanced Materials Research. :547-553
In this paper, cobalt oxide was deposited on the surface of Activated Carbon Fiber (ACF) by adsorption and was then sintered. The effects of cobalt oxide on the properties of ACF were studied by XPS, FTIR, and XRD methods. Mercury removal performance
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9b7c0fdb722cf57707d3269238f1d850
https://doi.org/10.4028/www.scientific.net/amr.356-360.547
https://doi.org/10.4028/www.scientific.net/amr.356-360.547
Publikováno v:
Applied Mechanics and Materials. :1221-1224
The development and application of Inorganic Ceramic Materials is a hot topic nowadays, especially in pollution controlling area. In this paper, the applications of Inorganic Ceramic Materials in water pollution control technology and air pollution p
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::309527452ffb03b2ceebc2e3b5ecab75
https://doi.org/10.4028/www.scientific.net/amm.71-78.1221
https://doi.org/10.4028/www.scientific.net/amm.71-78.1221
Publikováno v:
Advanced Materials Research. :1211-1214
Nickel was loaded on the activated carbon fiber(ACF) surface, by adsorption and sintering. In order to change the chemical functional groups on the carbon fiber surface, and increase catalytic oxidation capacity and removal efficiency of activated ca
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::02fd342cc074ccbd858244b5dd655441
https://doi.org/10.4028/www.scientific.net/amr.156-157.1211
https://doi.org/10.4028/www.scientific.net/amr.156-157.1211
Publikováno v:
Energy Conversion and Management. 45:2283-2296
This paper describes our experimental study on CO2 removal by means of ammonia scrubbing. The experiment has been performed in an open continuous flow reactor under various operation conditions. The preliminary experimental results are very promising
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e850d6ab207f9dc2df3fb486338c7f9e
https://doi.org/10.1016/j.enconman.2003.10.011
https://doi.org/10.1016/j.enconman.2003.10.011
Publikováno v:
The Proceedings of the International Conference on Power Engineering (ICOPE). :2-271
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::274e833908ca484a7cf36ccfa67f3640
https://doi.org/10.1299/jsmeicope.2003.2._2-271_
https://doi.org/10.1299/jsmeicope.2003.2._2-271_
Publikováno v:
Flow Measurement and Instrumentation. 13:173-181
Vorticity, the measure of the rotation of a fluid element, is an important characteristic of turbulence. There have been numerous attempts using various methods to measure vorticity. Vorticity measurements in turbulent flows using a hot-wire/hot-film
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d9b4d5ab21af3d73b268c6fe7940ec19
https://doi.org/10.1016/s0955-5986(02)00034-1
https://doi.org/10.1016/s0955-5986(02)00034-1
Publikováno v:
工程科学学报, Vol 42, Iss 2, Pp 154-162 (2020)
At present, the steel industry has become the focus of air pollution prevention and control. To solve the difficulty in collecting PM2.5 fine particles and achieving ultra-low emission of dust, based on the method of computational fluid dynamics-disc
Externí odkaz:
https://doaj.org/article/0866bc1b39364767b70fd3ca8623baf3