Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Yiren Pan"'
Publikováno v:
Advances in Polymer Technology, Vol 2022 (2022)
This paper is a study on the elongational deformation induced by pins in pin-barrel cold-feed extruders. The mathematical model is established by using simple flow field, plate model, and Newton constitutive relation. It is proved that there is elong
Externí odkaz:
https://doaj.org/article/8d35123c99e946ec95c5276bfbd3c8c0
Publikováno v:
Polymers, Vol 14, Iss 19, p 4207 (2022)
Silica and carbon black are the most important reinforcing systems in rubber formula. In the process of continuous optimization of the formula, silica gradually replaces carbon black by its characteristics. In view of the wear problem of the componen
Externí odkaz:
https://doaj.org/article/c9fe0a449e294972a3e7ed82e233910a
Publikováno v:
Polymers, Vol 14, Iss 17, p 3473 (2022)
This paper focused on adding a suitable lubrication effect at the interface between the rubber and mixer chamber wall on reducing the surface wear rate of the mixer chamber wall. In the research process, the contact model between the compound and int
Externí odkaz:
https://doaj.org/article/77747543ef774c2c8585953a8af0eb23
Publikováno v:
Polymers, Vol 14, Iss 17, p 3602 (2022)
In the process of rubber extrusion, the feed structure directly affects the extrusion quality, extrusion uniformity, screw lateral force, and feed power consumption. Until now, the feed structure was mainly based on empirical designs, and there was n
Externí odkaz:
https://doaj.org/article/416a3270fb984219ae08fd45db79e415
Publikováno v:
Polymers, Vol 14, Iss 7, p 1319 (2022)
In the cracking process of waste tires, pyrolysis carbon black (CBp), as a solid product, accounts for about 35% of the total tire rubber content. Here, the treated CBp has been gradually applied to the tire formula to improve the recycling efficienc
Externí odkaz:
https://doaj.org/article/fd5113df19bf461e80a25b719f7e9177
Publikováno v:
Materials, Vol 14, Iss 3, p 474 (2021)
In this study, the two key factors affecting the thermal performance of the insert rubber and stress distribution on the tire sidewall were analyzed extensively through various performance tests and simulations to promote the development of run-flat
Externí odkaz:
https://doaj.org/article/863d0974921d43f188e44528ce6f5389
Autor:
Kongshuo Wang, Haichao Liu, Tianhao Chang, Deshang Han, Yiren Pan, Chuansheng Wang, Huiguang Bian
Publikováno v:
Materials, Vol 13, Iss 23, p 5353 (2020)
The mixer is the most widely used batch mixing equipment in the rubber industry. The rotor is a core component and has a great impact on the mixing effect of the equipment. The current rotor structure design is done empirically, being tightly depende
Externí odkaz:
https://doaj.org/article/e71115ccd4f7418bbe5971775264476f
Publikováno v:
Materials, Vol 13, Iss 21, p 4896 (2020)
In this paper, the areca fiber was extracted by physical and chemical treatment, and then the areca fiber/natural latex composite was prepared by natural latex impregnation technology. In order to combine areca fiber and natural rubber latex better,
Externí odkaz:
https://doaj.org/article/c200d8be15c54435a804afa80e8e659c
Autor:
Lin Zhu, Xiaolong Tian, Yiren Pan, Tianhao Chang, Kongshuo Wang, Guangzhi Niu, Luqi Zhang, Chuansheng Wang, Wenwen Han
Publikováno v:
Polymers, Vol 12, Iss 2, p 416 (2020)
In the tire industry, the combination of carbon black and silica is commonly utilized to improve the comprehensive performance of natural rubber so as to realize the best performance and cost-effectiveness. The corresponding mixing is divided into th
Externí odkaz:
https://doaj.org/article/3ee6662d982b4caf8293e7f149680506
Publikováno v:
Materials, Vol 13, Iss 5, p 1071 (2020)
The gap between the rotor and the mixer chamber wall is an important factor in determining filler dispersion in rubber compounds. The inner wall of a mixer will wear after working for a long time, which will cause poor filler dispersion and affect th
Externí odkaz:
https://doaj.org/article/386f6cdeff584775924c194a3e63cbad