Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Yingjie Gan"'
Publikováno v:
IEEE Transactions on Electromagnetic Compatibility. 60:115-121
The insulation of plastic enclosures provides protection against direct electrostatic discharge (ESD) discharges to the system inside. However, seams between plastic parts are often unavoidable. To increase the voltage at which an ESD will penetrate
Autor:
Atieh Talebzadeh, David Pommerenke, Ki-Hyuk Kim, Yingjie Gan, Yifeng Zeng, Satyajeet Shinde, Xiaoying Xu
Publikováno v:
IEEE Transactions on Electromagnetic Compatibility. 60:96-106
This paper is centered on the phenomenological description of spark-less discharges to displays. It analyzes the conduction currents injected onto the glass and the displacement currents flowing through the glass for spark-less discharges to metal-ba
Autor:
Yingjie Gan, Giorgi Maghlakelidze, Wei Huang, Xiaoying Xu, Byongsu Seol, Suyu Yang, David Pommerenke
Publikováno v:
IEEE Transactions on Electromagnetic Compatibility. 58:1407-1416
When a charged cable is plugged into an Ethernet connector, a cable discharge event (CDE) will occur. Ethernet transceiver pins are often affected by CDE as they are usually unshielded. The discharge current couples via the transformer and common mod
Publikováno v:
Journal of Materials Science: Materials in Electronics. 25:4115-4121
The effects of copper oxide (CuO) on the microstructure and electric properties of nonstoichiometric compound terbium dioxide (Tb4O7) ceramics were investigated. Results included a reduction in the sintering temperature to 1,100 °C, a grain size of
Publikováno v:
Journal of Alloys and Compounds. 581:52-55
The La2O3-added WO3 was prepared by a conventional mixed oxide processing route and the thermoelectric properties were studied from 323 K up to 1023 K. The results revealed that doping WO3 with La2O3 could promote the grain size and the density. The
Publikováno v:
Journal of Materials Science: Materials in Electronics. 24:4494-4498
Tungsten trioxide (WO3) doped with stannic oxide (SnO2) was prepared by a conventional mixed oxide processing route. The microstructure of the SnO2-added WO3 ceramics samples were investigated by X-ray diffraction and scanning electron microscopy. Th
Publikováno v:
Journal of Materials Science: Materials in Electronics. 24:4001-4007
The effect of the nonstoichiometric compound terbium dioxide (Tb4O7) on the thermoelectric properties of tungsten trioxide (WO3) ceramics was investigated. Among the sintered ceramics, the sample doped with 0.1 mol% Tb4O7 showed the maximum grain siz
Autor:
Jianchi Zhou, Atieh Talebzadeh, Satyajeet Shinde, Pengyu Wei, David Pommerenke, Yingjie Gan, Shubhankar Marathe
Publikováno v:
2016 IEEE International Symposium on Electromagnetic Compatibility (EMC).
ESD to a display may upset or damage the display or the touch circuit. The ESD may have a visible spark carrying current to the frame of the mobile device, to the connecting flex cable, or into the display by penetrating the glue between the glass la
Autor:
Shubhankar Marathe, Yuandong Guo, Atieh Talebzadeh, David Pommerenke, Satyajeet Shinde, Ki-Hyuk Kim, Jianchi Zhou, Yingjie Gan
Publikováno v:
2016 IEEE International Symposium on Electromagnetic Compatibility (EMC).
During the IEC 61000-4-2 test the DUT is placed on a 0.5 mm insulating sheet, which is on the horizontal coupling plane (HCP). For discharge points on the back side of the phone this leads to a situation in which the display is facing the HCP. The ph
Publikováno v:
Journal of Materials Science: Materials in Electronics. 23:2229-2234
The influences of titanium dioxide (TiO2) on thermoelectric properties of tungsten trioxide (WO3) ceramics were investigated. In the sintered samples, the grain size of the ceramics was evidently reduced while the dense of the ceramics was improved d