Zobrazeno 1 - 10
of 174
pro vyhledávání: '"Ying Hei Chui"'
Publikováno v:
Buildings, Vol 14, Iss 8, p 2484 (2024)
Prefabricated wood construction relies heavily on efficient material handling, yet rigging system design for floor panels remains understudied. This study introduces a novel rigging device that attaches to prefabricated wood I-joist floor panels usin
Externí odkaz:
https://doaj.org/article/21054de874384a0591d9f26758bdfd93
Publikováno v:
Buildings, Vol 13, Iss 3, p 623 (2023)
Self-tapping screws (STS) are used in wood-to-wood and wood-to-steel connections in timber structures. Premature failure of STS during the construction phase has been reported by structural engineers and contractors in relation to a few North America
Externí odkaz:
https://doaj.org/article/1c30c3c0d15f4f65af363999b25da713
Autor:
Hossein Daneshvar, Mahboobeh Fakhrzarei, Fernanda Imamura, Yuxiang Chen, Lijun Deng, Ying Hei Chui
Publikováno v:
Buildings, Vol 12, Iss 7, p 979 (2022)
There is widespread enthusiasm toward utilizing mass timber panels (MTP), mainly cross-laminated timber (CLT), in construction, including for the basements of low-rise buildings. CLT is deemed a sustainable alternative to the widely used concrete fou
Externí odkaz:
https://doaj.org/article/2dbe21b2931146c98b361e1b7804a6aa
Publikováno v:
Buildings, Vol 12, Iss 7, p 885 (2022)
In the construction of modern multi-storey mass timber structures, a composite floor system commonly specified by structural engineers is the timber–concrete composite (TCC) system, where a mass timber beam or mass timber panel (MTP) is connected t
Externí odkaz:
https://doaj.org/article/f689ce9e19dc4293bd7d0601866c480c
Publikováno v:
Buildings, Vol 12, Iss 6, p 847 (2022)
This paper presents the results of an experimental study on the short-term mechanical performance of timber screw connections comprising two types of fasteners suitable for a novel panelized roof design process. Thirty-seven specimens of five differe
Externí odkaz:
https://doaj.org/article/32eac10245a647f3896ce6121c78e25a
Publikováno v:
Advances in Civil Engineering, Vol 2021 (2021)
Innovative mass timber panels, known as composite laminated panels (CLP), have been developed using lumber and laminated strand lumber (LSL) laminates. In this study, strain distributions of various 5-layer CLP and cross-laminated timber (CLT) were i
Externí odkaz:
https://doaj.org/article/7b51c764493e46069e35e45d3be1ee46
Publikováno v:
Advances in Civil Engineering, Vol 2021 (2021)
Over the last few decades, there has been growing interest in the use of low-carbon materials to reduce the environmental impacts of the construction industry. The advent of mass timber panels (MTP), such as cross laminated timber (CLT), has allowed
Externí odkaz:
https://doaj.org/article/a682dc3bdeac4ada97c4f85f750afd92
Publikováno v:
Advances in Civil Engineering, Vol 2021 (2021)
Cross-laminated timber (CLT) is a type of engineered wood product that offers both high in-plane and out-of-plane load-bearing capacity. It is slowly becoming an alternative material for building high-rise structures. However, there is no current sta
Externí odkaz:
https://doaj.org/article/030997ed859c4a43a2404d40fb39bbc0
Publikováno v:
Education Sciences, Vol 11, Iss 12, p 765 (2021)
Due to the efficiency, sustainability, and advances in firefighting technologies, the allowable height for wood buildings was increased from 4 to 6 storeys in 2015 and will be further increased to 12 storeys in the 2020 edition of the National Buildi
Externí odkaz:
https://doaj.org/article/e5f581c09fbb4bc4ab3b0086b61c24bc
Publikováno v:
Advances in Materials Science and Engineering, Vol 2019 (2019)
This paper describes the experimental studies on Mode I fracture of parallel strand bamboo (PSB) by the double cantilever beam (DCB) test. R-curves based on the elementary beam theory and specimen compliance are proposed in order to overcome the diff
Externí odkaz:
https://doaj.org/article/55f60f894b3348a5a4374fd742b60efb