Zobrazeno 1 - 10
of 33
pro vyhledávání: '"Yi Liang Peng"'
Publikováno v:
Key Engineering Materials. 853:109-114
From the compression test of steel fiber recycled mortar porous brick masonry, it was researched the effects of different amounts of steel fiber and recycled fine aggregate on compressive strength, failure morphology, elastic modulus, stress-strain l
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6b818916611039cac54eae5fe3336ff3
https://doi.org/10.4028/www.scientific.net/kem.853.109
https://doi.org/10.4028/www.scientific.net/kem.853.109
Publikováno v:
Applied Mechanics and Materials. :101-104
With the rapid development of power transmission and transformation projects in China, steel supporting structure has already became the most popular structural form for these structures. However, the limit of steel grade used for current substation
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::306719f433a8f3485334dd3fffcde8bd
https://doi.org/10.4028/www.scientific.net/amm.638-640.101
https://doi.org/10.4028/www.scientific.net/amm.638-640.101
Publikováno v:
Advanced Materials Research. :112-116
This paper studies on the stability capacity of E-glass fiber reinforced polymer (GFRP) tubes under axial compression in order to get the formula, which can be applied to structure design. Firstly, on the basis of test data, finite element analysis i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f2cd3cfd0d86cd1aa810f0186fa51f28
https://doi.org/10.4028/www.scientific.net/amr.756-759.112
https://doi.org/10.4028/www.scientific.net/amr.756-759.112
Publikováno v:
Applied Mechanics and Materials. :173-176
The hot-dip coatings containing Zn-Al-Mg-Ce were prepared through congruent melting. The anti-corrosion performance of the coatings was researched using the weight loss rate by the neutral salt spray testing. The reasons of the effects of the element
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b0361c737c3dcda05ed89dd3e14e4059
https://doi.org/10.4028/www.scientific.net/amm.423-426.173
https://doi.org/10.4028/www.scientific.net/amm.423-426.173
Publikováno v:
Applied Mechanics and Materials. :708-711
The hot-dip galvanizing coating can promote the anti-corrosion performance of the bolts in outdoor steel structure engineering. But the anti-corrosion performance cannot match that of the steel due to the centrifugal process. In this paper, the anti-
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ebd434d0dbd73fa04807fdc781cb2681
https://doi.org/10.4028/www.scientific.net/amm.395-396.708
https://doi.org/10.4028/www.scientific.net/amm.395-396.708
Publikováno v:
Applied Mechanics and Materials. :3186-3191
in order to research the influence of bolt pretension on the rigid flange joints stiffness further, ANSYS finite element model was built on the basis of experimental investigations, and was used to research the influence of bolt pretension on the axi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::32b5113c6b3f3a1ff54d924c2ae20f91
https://doi.org/10.4028/www.scientific.net/amm.405-408.3186
https://doi.org/10.4028/www.scientific.net/amm.405-408.3186
Publikováno v:
Applied Mechanics and Materials. :169-172
The zinc-rich coating prevents steel from corrosion by sacrificing electrochemical cathode anode protection, but the zinc content is the most important parameter. In this paper, the zinc-rich coatings made with the amino resin, acrylic resin, complex
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dc4fa922bed503f73155682e46d6adeb
https://doi.org/10.4028/www.scientific.net/amm.423-426.169
https://doi.org/10.4028/www.scientific.net/amm.423-426.169
Publikováno v:
Applied Mechanics and Materials. :1328-1331
Portland cement, crushed stone, sand and superplasticizer were used to obtain a high strength concrete with a low water to binder ratio. A reticular polypropylene fiber and a single polypropylene fiber were used to improve the strength of the high st
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::878341a5ea7285f08fac564eaff25c60
https://doi.org/10.4028/www.scientific.net/amm.357-360.1328
https://doi.org/10.4028/www.scientific.net/amm.357-360.1328
Publikováno v:
Applied Mechanics and Materials. :1332-1336
Portland cement, silica fume, superplasticizer and fly ash cemamsite were used to obtain a high strength lightweight aggregate concrete with lower water to binder ratio. An enhancement effect on the strength was gained by adding steel fiber. When the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e502dc92e91b591cbfd136d765235328
https://doi.org/10.4028/www.scientific.net/amm.357-360.1332
https://doi.org/10.4028/www.scientific.net/amm.357-360.1332
Publikováno v:
Advanced Materials Research. :509-513
Simple joint is a common connection in tubular structures, it refers to one or more components soldered directly on the surface of the other member. Local buckling occurs in panel zone when the joint under heavy load, such local buckling will reduce
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::afb84eb0e2fd30887b1b788062497efd
https://doi.org/10.4028/www.scientific.net/amr.671-674.509
https://doi.org/10.4028/www.scientific.net/amr.671-674.509