Zobrazeno 1 - 10
of 75
pro vyhledávání: '"Yangchuan Cai"'
Publikováno v:
Materials Research Express, Vol 11, Iss 3, p 036521 (2024)
In this current investigation, the impact of Nickel (Ni) on the microstructural attributes and properties of a cold-rolled 316 L sheet was examined. The microstructure and phase configuration of austenitic stainless steels, specifically 316 L and 316
Externí odkaz:
https://doaj.org/article/c8e8dd54752c4c5ea2393016f4fcaac9
Publikováno v:
Metals, Vol 12, Iss 11, p 1789 (2022)
High-entropy alloys (HEAs) are a new type of multi-component alloy. The design of the compositions breaks the design ideas of traditional alloys and shows many excellent properties. Therefore, an Al0.5FeCoCrNi HEA with face-centered cubic (FCC) and b
Externí odkaz:
https://doaj.org/article/96e9b8f0889343df9d754d2229a432c2
Publikováno v:
Metals, Vol 12, Iss 5, p 767 (2022)
In the present study; an AlCoCrFeNi high-entropy alloy (HEA) component was produced by laser melting deposition (LMD) technique. Then; a heat-treatment process based on the detection results of Differential Scanning Calorimeter (DSC) was used. The ef
Externí odkaz:
https://doaj.org/article/5abfe4b8b54d489a88166220054a15dd
Publikováno v:
Advances in Mechanical Engineering, Vol 12 (2020)
Ultrasonic-assisted transient liquid phase bonding of pure Cu with Sn-In solder was realized at 140°C in air. Shear test was carried out on the weldment. The effect of ultrasonic vibration on microstructure and mechanical properties of the weld seam
Externí odkaz:
https://doaj.org/article/db3be74a5b084845ba22fac382219805
Publikováno v:
Metals, Vol 8, Iss 11, p 975 (2018)
Aluminum powders with different concentrations of TiC ceramic particles were applied to an AZ31B magnesium alloy by laser cladding. Due to differences in coefficients of thermal expansion, the distribution of TiC ceramic particles in the cladding lay
Externí odkaz:
https://doaj.org/article/3965d50a30db4abc862e61c17bcece03
Publikováno v:
Metals, Vol 8, Iss 8, p 595 (2018)
In this study, wire and arc additive manufacturing (WAAM) was used to form SUS304/aluminum alloys. The buildup wall was well shaped using a pulse current consisting of a base current of 150 A and peak current of 200 A and a 0.2 m/min travel speed. Me
Externí odkaz:
https://doaj.org/article/d42adf2404864420a23db4a20e5af907
Autor:
Jian Han, Xinya Chen, Guoyang Zhang, Bang Liu, Meiqing Meng, Yangchuan Cai, Hongbing Jiang, Mingjie Bi, Yueqian Hong, Yinbao Tian
Publikováno v:
3D Printing & Additive Manufacturing; Jun2024, Vol. 11 Issue 3, p1008-1015, 8p
Publikováno v:
Surface Engineering. 38:778-785
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f94bc3768f1fb376d7c098af4f4c0d9e
https://doi.org/10.1080/02670844.2022.2153497
https://doi.org/10.1080/02670844.2022.2153497
Autor:
Mengdie Shan, Songyu Wang, Yangchuan Cai, Feifeng Gao, Sunusi Marwana Manladan, Lisong Zhu, Da Sun, Jian Han
Publikováno v:
Materials Science and Technology. 38:1617-1624
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::967fd6c5c6baffb9828f02ee4af1dda1
https://doi.org/10.1080/02670836.2022.2096821
https://doi.org/10.1080/02670836.2022.2096821
Autor:
Jian Han, Xinya Chen, Guoyang Zhang, Bang Liu, Meiqing Meng, Yangchuan Cai, Hongbing Jiang, Mingjie Bi, Yueqian Hong, Yinbao Tian
Publikováno v:
3D Printing and Additive Manufacturing.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ba99099b0319c6a5094062ef6e1792eb
https://doi.org/10.1089/3dp.2023.0003
https://doi.org/10.1089/3dp.2023.0003