Zobrazeno 1 - 10
of 108
pro vyhledávání: '"YANBO PEI"'
Publikováno v:
Journal of Magnesium and Alloys, Vol 12, Iss 7, Pp 2725-2740 (2024)
The Mg-7Gd-4Y-2Zn-0.5Zr alloy chips were successfully recycled through isothermal sintering and equal channel angular pressing (ECAP). The mechanical properties and microstructure evolution of samples during the recycling process were studied in deta
Externí odkaz:
https://doaj.org/article/3ca589ff4d234736b1a2b7a683020a4b
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 449-460 (2024)
As shear stress plays a significant role in the deformation of tubular parts with complex shapes, investigation of the microstructue evolution of tubes under the shear stress state is beneficial to understanding the shear deformation mechanism and pr
Externí odkaz:
https://doaj.org/article/75545e80080b4937b10ac4a63dafa5a0
Publikováno v:
Journal of Materials Research and Technology, Vol 25, Iss , Pp 5038-5050 (2023)
Strain rate plays an important role in the hot deformation process of materials. In this work, hot compression experiments were conducted on Mg-Gd-Y-Sm-Zr alloy at the strain rates of 0.001–1 s−1 by Gleeble thermal simulation machine. The deforma
Externí odkaz:
https://doaj.org/article/fac35f1da3b5454a9b660f2f51690006
Publikováno v:
Materials & Design, Vol 230, Iss , Pp 111962- (2023)
A new Mg-5.5Gd-3Y-1Sm-0.5Zr (1Sm) alloy was developed. The deformation behavior and microstructure evolution of the Mg-Gd-Y-(Sm)-Zr alloys during hot compression were investigated systematically. The effects of Sm element addition on the workability
Externí odkaz:
https://doaj.org/article/4f961df45da749a0abe8a2b5cc886d31
Publikováno v:
Scientific Reports, Vol 11, Iss 1, Pp 1-7 (2021)
Abstract Remarkable spots and lines were clearly observed at the two interfaces of indium-tin-oxide coated Z-cut Fe-doped lithium noibate plates under illumination by milliwatt continuous-wave laser light; this occurred because of the visible surface
Externí odkaz:
https://doaj.org/article/3af07d0fe74e4afcb6c71cbf6f1ff650
Publikováno v:
Frontiers in Bioengineering and Biotechnology, Vol 8 (2020)
Externí odkaz:
https://doaj.org/article/a6f73cdaa489432c985f81aef9e1cfa1
Autor:
Yanbo Pei, Ming-Yuan Wei
Publikováno v:
Frontiers in Bioengineering and Biotechnology, Vol 7 (2019)
As an emerging technique, ultrasound-modulated fluorescence (UMF), or ultrasound switchable fluorescence (USF) bioimaging has shown promising features to produce deep-tissue and high-resolution fluorescence imaging for biomedical research and health
Externí odkaz:
https://doaj.org/article/7d305c6e93d444c6b9b98cd132ab7ea1
Autor:
Tao Huang, Zhuo Song, Fuxiao Chen, Junqing Guo, Yanbo Pei, Binghui Xing, Nan Xiang, Kexing Song
Publikováno v:
Materials, Vol 13, Iss 16, p 3556 (2020)
Anisotropy is the difference in the microstructure or mechanical properties of materials in different directions. Anisotropic behavior occurs in rolled sheets, and this anisotropy is very obvious in laminated composites. In this work, the influence o
Externí odkaz:
https://doaj.org/article/2a7c627934e74975b6dd1a2af78382b6
Publikováno v:
Materials Research Express, Vol 7, Iss 11, p 112002 (2020)
Metal laminated composite (MLC) have attracted widespread attention for their potential in achieving excellent properties. However, damage and failure are more likely to occur during the plastic deformation due to the existence of the interface regio
Externí odkaz:
https://doaj.org/article/6d85c095d5f94c00b2ff27c51e0b0e53
Publikováno v:
Materials Research Express, Vol 7, Iss 6, p 066525 (2020)
AZ63 magnesium alloy sheets were fabricated by accumulative roll bonding (ARB) process at 350 °C up to 5 cycles. The aim of this work is to study the effect of ARB process on the microstructure and corrosion behavior of AZ63 magnesium alloy. The ARB
Externí odkaz:
https://doaj.org/article/e33ccd11b69848a39026fc089c517bc2