Zobrazeno 1 - 10
of 82
pro vyhledávání: '"Xuan-Hung Le"'
Publikováno v:
Machines, Vol 11, Iss 7, p 716 (2023)
This paper introduces a novel approach to deal with the multi-objective optimization of a two-stage bevel helical gearbox by applying the Taguchi method and Grey Relation Analysis (GRA). The goal of the study is to find optimal main design factors th
Externí odkaz:
https://doaj.org/article/eed231c98cfa43d6a870b57d68852925
Autor:
Xuan-Hung Le, Ngoc-Pi Vu
Publikováno v:
Applied Sciences, Vol 13, Iss 13, p 7601 (2023)
This paper presents a novel approach to solve the multi-objective optimization problem designing a two-stage helical gearbox by applying the Taguchi method and the grey relation analysis (GRA). The objective of the study is to identify the optimal ma
Externí odkaz:
https://doaj.org/article/8a38a79a2a234f9d812a76143b85d1b9
Publikováno v:
Applied Sciences, Vol 12, Iss 16, p 8287 (2022)
Multi-criteria decision making (MCDM) is a research area that entails analyzing various available options in a situation involving social sciences, medicine, engineering, and many other fields. This is due to the fact that it is used to select the be
Externí odkaz:
https://doaj.org/article/7cbd48dfaa204106bd1f90e90caf7cb7
Publikováno v:
Tehnički Vjesnik, Vol 26, Iss 5, Pp 1297-1304 (2019)
Improving milling performances is an effective solution to decrease the costs required. This paper addressed a multi-response optimization to simultaneously decrease the machining power consumed Pm, arithmetical roughness Ra, and ten-spot roughness R
Externí odkaz:
https://doaj.org/article/5dd3f019e5544cc6bc498273fbca3171
Publikováno v:
Machines, Vol 10, Iss 5, p 303 (2022)
The MCDM problem is very important and often encountered in life and in engineering as it is used to determine the best solution among various possible alternatives. In this paper, the results of the MCDM problem in the dressing process for internal
Externí odkaz:
https://doaj.org/article/49d92d993c2143c5b159c0a9b76eebb2
Autor:
Anh-Tuan Nguyen, Xuan-Hung Le, Van-Tung Nguyen, Dang-Phong Phan, Quoc-Hoang Tran, Dinh-Ngoc Nguyen, Manh-Cuong Nguyen, Ngoc-Pi Vu
Publikováno v:
Machines, Vol 9, Iss 12, p 375 (2021)
In the current study, an optimization process of powder-mixed electrical discharge machining (PMEDM) process when machining cylindrically shaped parts made of hardened 90CrSi steel is reported. In this study, SiC powder was mixed into the Diel MS 700
Externí odkaz:
https://doaj.org/article/2a4df9e7044f4e15b15e6651ea862972
Autor:
Ngoc-Pi Vu, Xuan-Hung Le, Dinh-Ngoc Nguyen, Anh-Tung Luu, Thanh-Tu Nguyen, Ngoc-Giang Tran, Thi-Hong Tran, Thangaraj Muthuramalingam
Publikováno v:
Applied Sciences, Vol 10, Iss 11, p 3920 (2020)
The blasting technique has been broadly utilized to prepare new surfaces for painting, engraving, etc., in industry. In fact, the minimization of the cleaning cost system is essential. However, the knowledge of this technique in terms of optimization
Externí odkaz:
https://doaj.org/article/0a9a0ae88d474df08ee980dded0a0741
Autor:
Thi-Hong Tran, Anh-Tung Luu, Quoc-Tuan Nguyen, Hong-Ky Le, Anh-Tuan Nguyen, Tien-Dung Hoang, Xuan-Hung Le, Tien-Long Banh, Ngoc-Pi Vu
Publikováno v:
Metals, Vol 9, Iss 4, p 448 (2019)
Based on a cost analysis, a method of identifying and predicting optimum replaced grinding wheel diameter (De.op) in a surface grinding operation for 9CrSi steel material was developed in this study. The De.op value was determined by minimizing the c
Externí odkaz:
https://doaj.org/article/36e5a8874007455d87f6a650061f5bb3
Autor:
Thi-Hong Tran, Xuan-Hung Le, Quoc-Tuan Nguyen, Hong-Ky Le, Tien-Dung Hoang, Anh-Tung Luu, Tien-Long Banh, Ngoc-Pi Vu
Publikováno v:
Applied Sciences, Vol 9, Iss 7, p 1363 (2019)
This paper shows an optimization study on calculating the optimum replaced wheel diameter in internal grinding of stainless steel. In this work, the effects of the input factors, including the initial diameter, the grinding wheel width, the ratio bet
Externí odkaz:
https://doaj.org/article/9f2fa169d72b4150b155f2663868895d
Autor:
Ngoc-Pi Vu, Quoc-Tuan Nguyen, Thi-Hong Tran, Hong-Ky Le, Anh-Tuan Nguyen, Anh-Tung Luu, Van-Tung Nguyen, Xuan-Hung Le
Publikováno v:
Applied Sciences, Vol 9, Iss 5, p 957 (2019)
Cutting regime parameters play an important role in determining the efficiency of the grinding process and the quality of the ground parts. In this study, the influences of the cutting parameters, including the cutting depth (ae), the feed rate (Fe)
Externí odkaz:
https://doaj.org/article/5c3e768800cf41a9adccdd0db5aa4b8f