Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Xianjue Ye"'
Autor:
Biaobiao Yang, Chenying Shi, Xianjue Ye, Jianwei Teng, Ruilin Lai, Yujie Cui, Dikai Guan, Hongwei Cui, Yunping Li, Akihiko Chiba
Publikováno v:
Journal of Magnesium and Alloys, Vol 11, Iss 3, Pp 998-1015 (2023)
The inconsistencies regarding the fundamental correlation between Gd content and slip (twinning) activities of Mg alloys appeal further investigations. However, the traditional slip dislocations analysis by TEM is time-consuming, and that by SEM/EBSD
Externí odkaz:
https://doaj.org/article/aa9caee989684b21ad6083bc2d7c1698
Publikováno v:
Materials, Vol 16, Iss 24, p 7591 (2023)
This study is the first to research the microstructure and mechanical properties of the workpiece after additive friction stir deposition (AFSD) of the feedstock at different heat treatment stages. AA2219 aluminum alloys with three different heat tre
Externí odkaz:
https://doaj.org/article/d6c2f6d33e5947178093d2ab966895ca
Publikováno v:
Materials, Vol 15, Iss 13, p 4524 (2022)
In this work, the quantification of key microstructural features like γ′ size morphology distribution, grain size, and localized stress distribution, especially near a fracture, were coupled with mechanical properties under various temperatures in
Externí odkaz:
https://doaj.org/article/bca411f523994b86baaaeadcf6caafd6
Autor:
Chenying Shi, Jianwei Teng, Akihiko Chiba, Ruilin Lai, Yujie Cui, Yunping Li, Xianjue Ye, Dikai Guan, Biaobiao Yang, Hongwei Cui
Publikováno v:
Journal of Magnesium and Alloys. 11:998-1015
The inconsistencies regarding the fundamental correlation between Gd content and slip (twinning) activities of Mg alloys appeal further investigations. However, the traditional slip dislocations analysis by TEM is time-consuming, and that by SEM/EBSD
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::13ca104cecee19550b223c6006a119b3
https://doi.org/10.1016/j.jma.2021.06.008
https://doi.org/10.1016/j.jma.2021.06.008
Publikováno v:
Materials, Vol 15, Iss 8, p 2796 (2022)
The Portevin-Le Châtelier (PLC) effect in a powder metallurgy (PM) Co-Ni-based superalloy was systematically investigated via the tensile tests at temperatures ranging from 200 to 600 °C and strain rates at 1.0 × 10−4 to 1.0 × 10−2. Both norm
Externí odkaz:
https://doaj.org/article/6b9f92d1c91f4c33b94274cfe1fb21cf
Autor:
Li, Ruilin Lai, Weijun Zhang, Xiaofei Sheng, Xianjue Ye, Yingfeng Cai, Xiwei Zhang, Temiao Luo, Pinghu Chen, Qian Lei, Yunping
Publikováno v:
Coatings; Volume 13; Issue 6; Pages: 1032
In this work, we fabricated lap joints between embossed projection phosphorus bronze and flat brass through resistance projection welding (RPW). The experimental results indicated that the bronze projection moves into the softer brass without being d
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=multidiscipl::9b20c62c8bd936bb6e963240530084b9
Publikováno v:
Journal of Materials Engineering and Performance.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f5470a320188c52b07698a9b42c73907
https://doi.org/10.1007/s11665-023-08305-6
https://doi.org/10.1007/s11665-023-08305-6
Publikováno v:
Materials, Vol 14, Iss 3, p 656 (2021)
Microstructure and mechanical properties of novel Ni-20Co-12Cr superalloys, with and without Nb addition, were systematically studied during long-term thermal exposure. With increased exposure time, the average diameter of the γ′ precipitates incr
Externí odkaz:
https://doaj.org/article/72f4a8a923444dd8b2bf3723f1e7a071
Publikováno v:
Materials, Vol 11, Iss 12, p 2549 (2018)
This research was aimed at investigating the high temperature oxidation behavior of Inconel 718 superalloy fabricated by electron beam melting with the building direction of 0°, 55° and 90° deviation from the Z axis of cylindrical samples. Columna
Externí odkaz:
https://doaj.org/article/075d9190ad614ece9d77e4d514a527fb
Autor:
Jianwei Teng, Junfei Huang, Biaobiao Yang, Shu Yu, Yunping Li, Yan Nie, Xianjue Ye, Junjie Tang
Publikováno v:
Advanced Powder Technology. 31:2912-2920
Flowability, particle size distribution and particle inner pore features for powders of Ti-6Al-4V, 316-steel, and Co-29Cr-6Mo alloys produced by plasma rotating electrode process (PREP) at various rotation speeds are analyzed by using scanning electr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7ee3f25af3e169a982d5a5bed2fd6673
https://doi.org/10.1016/j.apt.2020.05.018
https://doi.org/10.1016/j.apt.2020.05.018