Zobrazeno 1 - 10
of 24
pro vyhledávání: '"Wojciech Labuda"'
Autor:
Wojciech Labuda, Agata Wieczorska
Publikováno v:
Advances in Sciences and Technology, Vol 18, Iss 6, Pp 189-205 (2024)
The publication presents the results of research on the influence of hydrostatic burnishing process on the value of selected parameters of surface roughness, material ratio and surface hardness. The process was carried out on shafts made of X5CrNi18-
Externí odkaz:
https://doaj.org/article/00d2d4a87126440ea1d1b9cc27dcafcc
The Influence of Burnishing Process on the Hardness and Surface Roughness of Aluminium Welded Joints
Autor:
Wojciech Labuda, Agata Wieczorska
Publikováno v:
Scientific Journal of Gdynia Maritime University, Iss 128 (2023)
The article presents the effect of burnishing on the surface roughness and hardness of the EN AW-6060 aluminum alloy after welding. The samples prepared were welded using the 141-TIG method, and then the surfaces to be burnished were prepared in the
Externí odkaz:
https://doaj.org/article/fcb73b104d8048848a103c88ab796458
Publikováno v:
Materials, Vol 17, Iss 1, p 43 (2023)
This paper presents the effect of burnishing on the surface hardness, selected surface roughness parameters and material ratio of tubes made of an EN AW-6060 aluminum alloy after welding. The prepared specimens were subjected to a 141-TIG welding pro
Externí odkaz:
https://doaj.org/article/d0f0fedb733d4a56a5a2fd04cb9e0cf2
Autor:
Krzysztof Dudzik, Wojciech Labuda
Publikováno v:
Materials, Vol 13, Iss 13, p 2926 (2020)
Ensuring optimal turning conditions has a huge impact on the quality and properties of the machined surface. The condition of the cutting tool is one of the factors to achieve this goal. In order to control its wear during the turning process, monito
Externí odkaz:
https://doaj.org/article/72b57ef9964b4e3abf13259f7ec507bf
Autor:
Wojciech Labuda, Adam Charchalis
Publikováno v:
Journal of KONBiN. 52:1-26
The research used shafts made of X5CrNi18-10 (AISI 304L) stainless steel, which is used, among others in the shipbuilding industry. The turning process was carried out on the CU500MRD universal lathe with the use of cutting inserts with a corner radi
Autor:
Wojciech Labuda
Publikováno v:
WSEAS TRANSACTIONS ON SYSTEMS AND CONTROL. 15:311-319
The article presents the research results referring to the analysis of the influence of cuttingparameters on value of cutting forces during turning pins of shaft. For the monitoring of forces during lathingprocess used Kistler dynamometer. The dynamo
Autor:
Wojciech Labuda
Publikováno v:
Journal of KONES. 26:141-148
One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process. The technology used s
Autor:
Kinga Wierzba, Marcin Fudalej, Tomasz Jurek, Jacek Baj, Iwona Ptaszyńska-Sarosiek, Piotr Engelgardt, Piotr Kowalski, Łukasz Szleszkowski, Tomasz Cywka, Radosław Drozd, Dorota Lorkiewicz-Muszyńska, Marta Rorat, Agata Thannhäuser, Marek Wiergowski, Jarosław Berent, Jan Unarski, Krzysztof Kordel, Julia Sobol, Ryszard Szozda, Magdalena Okłota-Horba, Wojciech Labuda, Zbigniew Gąszczyk-Ożarowski, Wojciech Kwietniewski, Dariusz Wilk, Seweryn Nowak, Mirosław Kędzierski, Michał Szeremeta, Grzegorz Staśkiewicz, Agnieszka Nowak, Ewa Wolska, Magdalena Czuba, Anna Niemcunowicz-Janica, Grzegorz Teresiński, Wojciech Wach, Grzegorz Buszewicz, Dominika Kocowska-Dzik, Piotr Janeczek, Michał Tracz, Aleksandra Borowska-Solonynko, Rafał Skowronek, Marek Mandera
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::49b38c97a5f2408d6fb18820c45f84e7
https://doi.org/10.53270/2021.011
https://doi.org/10.53270/2021.011
Autor:
Wojciech Labuda
Publikováno v:
Journal of KONES. 26:81-88
One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process. The technology used s
Autor:
Wojciech Labuda
Publikováno v:
Journal of KONES. Powertrain and Transport. 23:207-214