Zobrazeno 1 - 10
of 15
pro vyhledávání: '"Wojciech Żurowski"'
Autor:
Radek Stoček, Anita Białkowska, Mohamed Bakar, Małgorzata Przybyłek, Barbora Hanulikova, Wojciech Żurowski
Publikováno v:
National Information Processing Institute
The effect of organomodified montmorillonite (MMT) content and mixing conditions on the mechanical properties, structure, and morphology of a chloroprene rubber was investigated. Nanoparticles were mechanically mixed with a plasticizer, followed by u
Publikováno v:
Advances in Science and Technology Research Journal, Vol 13, Iss 4, Pp 239-245 (2019)
In the paper, the issue of sliding sleeves wear in a cycloidal transmission is addressed. The working model of a cycloidal drive was constructed and tested in the special rig, and its sleeves underwent detailed analysis afterwards. The sleeves were p
Autor:
Sylwester Stawarz, Magdalena Stawarz, Wojciech Kucharczyk, Agnieszka Różycka, Wojciech Żurowski
Publikováno v:
Advances in Science and Technology Research Journal, Vol 13, Iss 4, Pp 223-229 (2019)
Test results are presented of composites used in self-lubricating sliding pairs where resol phenol-formaldehyde (AW-1, FDP), novolak phenol-formaldehyde, and anthracene-phenol resins are applied as binders. Thermal resistance, load capacity, friction
Autor:
Marcin Kostrzewa, Justyna Kucińska-Lipka, Joanna Masiewicz, Martyna Roszowska-Jarosz, Paweł Przybyłek, Wojciech Żurowski, Wojciech Kucharczyk
Publikováno v:
Materials, Vol 14, Iss 3576, p 3576 (2021)
Materials
Volume 14
Issue 13
Materials
Volume 14
Issue 13
The aim of our research was to investigate the effect of a small nanocellulose (NC) addition on an improvement of the mechanical properties of epoxy composites. A procedure of chemical extraction from pressed lignin was used to obtain nanocellulose f
Autor:
Wojciech Żurowski, Wojciech Kucharczyk, Sylwester Stawarz, Mohamed Bakar, Anita Białkowska, T. Opara
Publikováno v:
Composite Structures. 280:114801
The present work investigates the thermo-protective ablative and dynamic mechanical properties of two kinds of epoxy resins modified with carbon nanotubes (1 vol% or 5 vol% of CNT) and homogenized mechanically or ultrasonically. The samples have been
Autor:
Agnieszka Różycka, Wojciech Żurowski
Publikováno v:
AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe. 19:264-272
The article discusses the minimum requirements and essential requirements for machines and technical devices. The state of implementation of directives related to work safety was presented on the basis of inspections carried out by inspectors of the
Publikováno v:
AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe. 19:992-995
The article discusses active wheel systems used in motor vehicles and aviation. The use of chassis with active wheels, i.e. wheels equipped with integral electric drive, significantly facilitates maneuvering of helicopters during taxiing. This allows
Publikováno v:
Advances in Materials Science. 18:49-58
The present work investigates the ablative and thermal properties of phenol formaldehyde glass-fabrics laminates filled with mixtures of corundum Al2O3 and carbon C powders. The laminates specimens of dimensions 10x25x35 mm were treated with hot comb
Publikováno v:
Composite Structures. 183:654-662
The present work investigates ablative and thermoprotective properties of epoxy resins modified with expanded perlite (vermiculite – 3% or 10% of weight share). The properties of two epoxy resins (Epidian 52 and Epidian 601 cured with triethylenete
Autor:
Wojciech Żurowski, Piotr Sztąberek
Publikováno v:
AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe. 19:331-333
Paper discussed an accident that occurred during the use of concrete block making machine for concrete blocks. The circumstances of the accident and its causes were indicated. Attention is paid to the necessity of reliable application of the provisio