Zobrazeno 1 - 10
of 136
pro vyhledávání: '"Wen-Cheng J Wei"'
Publikováno v:
International Journal of Ceramic Engineering & Science, Vol 2, Iss 4, Pp 177-186 (2020)
Abstract The glazes in celadon are Ca‐Al‐Si‐O based glasses with a trace of Fe species doped as a coloring agent. The color of celadon is generated by a dual‐coloring mechanism of chemico‐compositional coloring by Fe species, and structural
Externí odkaz:
https://doaj.org/article/e1289454cbc34e1cb84edba0104d2ea3
Autor:
Yu-Chien Lin, Wen-Cheng J. Wei
Publikováno v:
International Journal of Hydrogen Energy. 45:24253-24262
Thin and porous anodes need three important properties, high porosity, moderate catalytic ability, and no carbon deposition, when using hydrocarbon fuels for the operation of solid oxide fuel cells (SOFCs). Nickel-based (Ni/YSZ) cermets might perform
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::308c40e7a709a871726ba87e7f04a4f5
https://doi.org/10.1016/j.ijhydene.2020.05.281
https://doi.org/10.1016/j.ijhydene.2020.05.281
Publikováno v:
International Journal of Ceramic Engineering & Science, Vol 2, Iss 4, Pp 177-186 (2020)
The glazes in celadon are Ca‐Al‐Si‐O based glasses with a trace of Fe species doped as a coloring agent. The color of celadon is generated by a dual‐coloring mechanism of chemico‐compositional coloring by Fe species, and structural coloring
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8d74d7b25528bcf581583b4fd72084af
https://doaj.org/article/e1289454cbc34e1cb84edba0104d2ea3
https://doaj.org/article/e1289454cbc34e1cb84edba0104d2ea3
Publikováno v:
International Journal of Hydrogen Energy. 45:7069-7076
Direct internal reforming of methanol is applied as fuel for a Ni-YSZ anode-supported solid oxide fuel cell with a flat tube based on double-sided cathodes. It achieves a power density (PD) of 0.25 W/cm2 at 0.8 V, reaching about 90% of that is fueled
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8eb9da0b6094a42a93bd986de21218ff
https://doi.org/10.1016/j.ijhydene.2019.12.222
https://doi.org/10.1016/j.ijhydene.2019.12.222
Autor:
Yu-Hung Cheng, Wen-Cheng J. Wei
Publikováno v:
Journal of Ceramic Processing Research. 20:198-203
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7a980cef1cedada8bdb12b83ddbccb04
https://doi.org/10.36410/jcpr.2019.20.2.198
https://doi.org/10.36410/jcpr.2019.20.2.198
Publikováno v:
Materials, Vol 9, Iss 11, p 922 (2016)
(Bi,Sr)FeO3−δ (BSF) cathode materials doped with either Co, Ni or Mn are synthesized by an ethylene diamine tetra-acetic acid (EDTA)-citrate complexing method, and the effects of the doping level on the mixed electronic-ionic conductivity at vario
Externí odkaz:
https://doaj.org/article/52732c846b414fe3af6db47cbafd68e3
Autor:
Yu-Wei Lai, Wen-Cheng J. Wei
Publikováno v:
Materials, Vol 9, Iss 11, p 863 (2016)
Homogeneous Bi2O3-V2O5 powder mixtures with different amounts of V2O5 content (≤15 mol%) were prepared by colloidal dispersion and sintering to high density. The sintered and annealed samples were studied by thermal analysis, quantitative X-ray dif
Externí odkaz:
https://doaj.org/article/79fa3704fdf74d80874b3f9520017585
Synthesis and Study on Ionic Conductive (Bi1-x ,Vx )O1.5-δ Materials with a Dual-Phase Microstructure.
Autor:
Yu-Wei Lai1 r00527011@ntu.edu.tw, Wen-Cheng J. Wei1 wjwei@ntu.edu.tw
Publikováno v:
Materials (1996-1944). Nov2016, Vol. 9 Issue 11, p863. 15p. 2 Diagrams, 1 Chart, 11 Graphs.
Publikováno v:
Thin Solid Films. 618:202-206
20 mol% Gd-doped ceria (20GDC) films on poly-crystalline 8 mol% yttria-stabilized zirconia tapes (8YSZt) were rf-sputtered through a lab-made 20GDC oxide target and investigated with regard to the oxygen non-stoichiometry, chemical composition, and m
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6628813c790f475b5cb61405af8cbac2
https://doi.org/10.1016/j.tsf.2016.03.009
https://doi.org/10.1016/j.tsf.2016.03.009
Publikováno v:
SII
Preparation of ZnO absorbents by 3D additive manufacturing (AM) for the adsorption of H 2 S in syngas fuel is conducted. ZnO feedstock for 3D AM was extruded to produce pyramid catalytic ceramic support (the absorbent) with a fracture strength of 5.7
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b319a3bfb8b76453b35a058397d42fdf
https://doi.org/10.1109/sii.2017.8279198
https://doi.org/10.1109/sii.2017.8279198