Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Wei-Lin Zhao"'
Autor:
Wei-Lin Zhao, Wei Wang, Chen Liu, Ze-Peng Hou, Hai-Feng Ye, Run-Yu Huang, Zai-Bo Li, Jia-Xin Zhang, Xue-Yan Yang, Hong-Xia Zhu, Yan-Li Shi
Publikováno v:
Crystals, Vol 11, Iss 10, p 1210 (2021)
The relationship between the performance of avalanche photodiode (APD) and structural parameters of the absorption, grading, and multiplication layers has been thoroughly simulated and discussed using the equivalent materials approach and Crosslight
Externí odkaz:
https://doaj.org/article/13b8a78f35834bd9bb9d3d1807636261
Autor:
Run-Yu Huang, Hongxia Zhu, Chen Liu, Hai-Feng Ye, Zai-Bo Li, Wei Wang, Shi Yanli, Xue-Yan Yang, Wei-Lin Zhao, Jia-Xin Zhang, Ze-Peng Hou
Publikováno v:
Crystals, Vol 11, Iss 1210, p 1210 (2021)
Crystals
Volume 11
Issue 10
Crystals
Volume 11
Issue 10
The relationship between the performance of avalanche photodiode (APD) and structural parameters of the absorption, grading, and multiplication layers has been thoroughly simulated and discussed using the equivalent materials approach and Crosslight
Publikováno v:
Applied Mechanics and Materials. :40-43
The pulverized coal combustion in precalciner in the cement plant with capacity of 5000t/d was investigated by numerical calculation using Fluent software. The standard k-ε model and particle stochastic trajectory model was proposed to simulate the
Publikováno v:
Advanced Materials Research. :1352-1355
The paper presented the gas flow field and particle trajectory with a series of inner cylinders in cyclone preheater using RNG k-ε turbulence model and stochastic trajectory model on the platform of Fluent software. The separability and pressure los
Publikováno v:
Advanced Materials Research. 997:762-765
In order to investigate the characteristics of C1 cyclone in a 5000t/d cement production system, the gas flow velocity, pressure and raw particles movement trajectory in this cyclone was simulated on the basis of Fluent 6.3. The RNG k-ε turbulence m
Publikováno v:
Applied Mechanics and Materials. :251-255
Three heat pipes with nanofluids of Al2O3-water, CuO-water and SiO2-water were tested experimentally. The temperature distribution of their start-up process was analysed, and compared the heat pipe with water. The results showed that the start-up way
Publikováno v:
Advanced Materials Research. :570-573
In this paper, the effect on the thermal efficiency enhancement of a heat pipe using SiO2-water nanofluid on different operating states was investigated. SiO2-water nanofluids with mass concentrations of 0.1% ~ 2.0% have been prepared with theaverag
Publikováno v:
Advanced Materials Research. :1178-1181
Thermal conductivities of two kinds of nanofluids (SiO2-water and SiO2-ethylene glycol) were measured by transient hot-wire method at different volume fraction and temperature. Influences of volume fraction of particles and temperature on thermal con
Thermophysical Performances of Al2O3-Water Nanofluids and Its Heat Transfer Enhancement in Heat Pipe
Publikováno v:
Materials Science Forum. 688:339-343
Al2O3-water nanofluids with volume concentration of 0.1%~0.5% were prepared by a two-step method, the thermophysical parameters such as thermal conductivity, viscosity and surface tension were measured, The results showed that the thermal conductivit
Publikováno v:
Materials Science Forum. 688:266-271
Aqueous nanofluids composed of alumina nanoparticles with different sizes at a concentration from 0.1vol% to 0.5vol% were prepared by a two-step method. The suspension and dispersion characteristics were experimentally examined by zeta potential, ave