Zobrazeno 1 - 10
of 104
pro vyhledávání: '"Walter Smetana"'
Publikováno v:
Microelectronics International. 31:32-41
Purpose – This paper presents performance comparison of RF inductors with the same lateral geometry applying different substrate configurations. The purpose of presented research is to demonstrate and verify some advantages of low temperature co-fi
Publikováno v:
Key Engineering Materials. 543:212-215
Presented paper deals with mechanical and electrical properties of several commercially available LTCC (Low Temperature Co-fired Technology) tapes, as well as their thermal characterization. Three commercially available dielectric tape materials prov
Autor:
Nelu Blaz, Walter Smetana, Goran Radosavljevic, Michael Unger, Ljiljana Zivanov, Andrea Maric
Publikováno v:
Hemijska Industrija, Vol 67, Iss 4, Pp 621-628 (2013)
Hemijska industrija (2013) 67(4):621-628
Hemijska industrija (2013) 67(4):621-628
Presented paper deals with mechanical, electrical and thermal properties of several commercially available materials that are widely used for fabrication of electronic components, sensor systems etc. In the LTCC (Low Temperature Co-fired Technology).
Autor:
Johann Nicolics, Zorka Z. Vasiljevic, Goran Miskovic, Maria Vesna Nikolić, Miloljub D. Lukovic, Obrad S. Aleksic, Goran Radosavljevic, Walter Smetana
Publikováno v:
5th International Conference on Materials and Applications for Sensors and Transducers (IC-MAST2015) 27–30 September 2015, Mykonos, Greece
This research is focused on structural and electrical characterisation of tin oxide (SnO2) applied as a thick film and investigation of its properties as gas sensitive material. Micron sized SnO2 powder was milled in an agate mill for six hours to fa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2268af9ff936719f7d3557209bf6c91d
https://hdl.handle.net/21.15107/rcub_dais_2313
https://hdl.handle.net/21.15107/rcub_dais_2313
Autor:
Ljiljana Živanov, Ibrahim Atassi, Walter Smetana, Goran Radosavljevic, Nelu Blaž, Andrea Maric
Publikováno v:
Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT). 2012:000359-000364
The complex permeability values are the key parameters that determine properties of ferrite components. These parameters are very dependent on material structural properties and composition. This paper presents comparison of magnetic and structural p
Autor:
Johann Nicolics, Michael Weilguni, Alex Hofmann, Walter Smetana, Goran Radosavljevic, Werner Goebl
Publikováno v:
Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT). 2012:000411-000416
For the development of miniaturized force sensors, built up in ceramics technology with piezo-resistive principle, the compatibility of the piezo-resistive thick-film paste with the substrate and termination paste has to be verified. This paper deals
Publikováno v:
Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT). 2012:000388-000393
This paper presents for the first time one realization of simple planar inductor realized inside the stack of ferrite LTCC (Low Temperature Co-fired Ceramic) tapes. Presented inductor is one layer square spiral fabricated in the LTCC technology. In o
Autor:
Heinz Homolka, Nelu Blaz, Ibrahim Atassi, Andrea Maric, Ljiljana Zivanov, Goran Radosavljevic, Walter Smetana
Publikováno v:
IEEE Transactions on Magnetics. 48:1563-1566
The complex permeability of commercially available ferrite LTCC (Low Temperature Cofired Ceramics) tapes in dependence of peak sintering temperature have been measured and calculated in the high-frequency range (300 kHz-1.2 GHz). For the first time t
Publikováno v:
International Journal of Applied Ceramic Technology. 9:1-10
This article offers a detail description of design, simulation, fabrication and characterization of inductors on different substrate configurations intended for application in radio frequency range. The presented inductors are meander type structures
Autor:
Goran Stojanovic, Mirjana Maksimović, Goran Radosavljevic, Vlastimir Radonjanin, Walter Smetana, Milan Radovanovic, Mirjana Malešev
Publikováno v:
Construction and Building Materials. 26:327-333
In this paper, the application of a passive sensor for measuring the moisture content of building materials is described. The sensor was fabricated in Low Temperature Co-fired Ceramic (LTCC) technology, and consists of an inductor and an interdigitat