Zobrazeno 1 - 10
of 88
pro vyhledávání: '"Vladimir I. Lysak"'
Publikováno v:
Materials Science Forum. 1052:393-398
The article is devoted to the study of the kinetics of packet formation and energy distribution in the process of explosion welding. The results of experimental determination of the components of the total energy balance during explosion welding and
Publikováno v:
Defect and Diffusion Forum. 410:630-635
The article is aimed at studying the distribution of deformation work in the layers of the explosion-welded composite Al-Cr-St3 with a diffusion barrier. It is established that the thickness of the chromium layer does not affect the value of the tota
Publikováno v:
Science intensive technologies in mechanical engineering. 2021:3-11
There is considered a pre-heating effect upon the structure of wear-resistant alloys deposited upon 5HNM pressed tool steel by the method of an oscillating method. The results of investigations of transfer areas formed between deposited high-alloy me
Publikováno v:
Materials Science Forum. 1031:147-153
Experiments proved that the arc voltage influences its spatial form and electrode metal transfer behavior characteristics during twin electrode GMAW with a single power source. Two specific arc forms were revealed for two corresponding types of metal
Publikováno v:
Solid State Phenomena. 316:62-67
The work is devoted to a study of the probable causes of a decrease in joint strength during explosion welding of metals with sharply differing physical and mechanical properties. The influence of kinematic and energy parameters on the structure and
Publikováno v:
Welding and Diagnostics. :30-34
Publikováno v:
Russian Journal of Non-Ferrous Metals. 61:667-674
The results of studying the fine structure, chemical composition, and phase composition of boundaries between components of the Cr3C2–Ti hard alloy containing 40 wt % titanium binder in the state after the explosion compaction, as well as after hea
Autor:
A. A. Artemyev, I. V. Zorin, D. S. Denisevich, Yu. N. Dubtsov, V. O. Kharlamov, Vladimir I. Lysak, G. N. Sokolov
Publikováno v:
Voprosy Materialovedeniya. :74-86
The article presents an analysis of the influence of the alloying elements ratio in the Ni-Al-Cr-WMo-Ta system on the resistance of the deposited metal against thermal fatigue. The combined effect of alloying elements on the crack resistance of weld
Publikováno v:
Materials Science Forum. 989:733-738
This paper reports the investigation of the effect of a plate dynamic loading scheme upon bimetal joint formation at explosion welding with simultaneous stamping. The investigation results of the effect of technological parameters and matrix material
Publikováno v:
Materials Science Forum. 992:487-492
The Article presents the findings of the studies of the microstructure, chemical and phase composition of the Cr3C2-Ti system alloys obtained by the explosion. Scanning electron microscopy, energy dispersive and x-ray diffraction analyses were used.