Zobrazeno 1 - 10
of 15
pro vyhledávání: '"Vitaliy, Bobyr"'
Autor:
Pavel, Kuznetsov, Anna, Mozhayko, Ivan, Shakirov, Vitaliy, Bobyr, Mikhail, Staritsyn, Anton, Zhukov
Publikováno v:
Advanced Additive Manufacturing
This chapter presents the influence of powder bed laser scanning strategy on the crystallographic structure of the fused specimens 316 L, 321 stainless steel, and Alnico magnets. The main parameters affecting structure are as follows—laser power, s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::348a9f23ebf86696f8ac4fdc402ba5f6
https://doi.org/10.5772/intechopen.102073
https://doi.org/10.5772/intechopen.102073
Autor:
I. V. Shakirov, Alexey Dub, Anton Zhukov, Vitaliy Bobyr, P. A. Kuznetsov, Svetlana Shchurenkova
Publikováno v:
Materials Today: Proceedings. 38:1946-1951
As part of the work, the analytical justification of the choice of additive technology for the manufacture of complex large-size elements reactor vessel internals (RVI) of the VVER-TOI was performed. The VVER-TOI baffle was selected as a complex-prof
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cf874c7a13e5d3ad62be5ec0072f7e81
https://doi.org/10.1016/j.matpr.2020.09.090
https://doi.org/10.1016/j.matpr.2020.09.090
Publikováno v:
Procedia Manufacturing. 36:19-25
This work addresses direct metal laser-sintering (DMLS) of powders of complex chemical composition in order to manufacture products with minimal inhomogeneities in the chemical composition and structure. The raw material used was an ingot of steel 12
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::607c7a4c1350478a486c022c6d4e412e
https://doi.org/10.1016/j.promfg.2019.08.004
https://doi.org/10.1016/j.promfg.2019.08.004
Publikováno v:
Materials Today: Proceedings. 11:95-100
One of the urgent problems of additive manufacturing development is the high cost and limited choice of powder materials used in selective laser melting (SLM) technology. This paper presents the results of a study on the possibility of using iron pow
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::78abe3ad7ad68db06f4c739a18fa8cb6
https://doi.org/10.1016/j.matpr.2018.12.113
https://doi.org/10.1016/j.matpr.2018.12.113
Publikováno v:
Procedia Structural Integrity. 23:305-309
A powder of different fractional composition was obtained from the iron ingot using the melt atomization method, from which samples for further studies were grown on the EOSint M270 unit using the selective laser melting (SLM) method. When considerin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3b25445411957f152baff6a28f606c6a
https://doi.org/10.1016/j.prostr.2020.01.104
https://doi.org/10.1016/j.prostr.2020.01.104
Publikováno v:
Materials Science Forum. 933:330-336
Production of the honeycomb or thin walled structures by the selective laser melting of powder is of a great scientific and practical interest. It’s because that such approach allows producing structures practically of any configuration and thickne
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ce2431143cc417a302821be217e7b4d5
https://doi.org/10.4028/www.scientific.net/msf.933.330
https://doi.org/10.4028/www.scientific.net/msf.933.330
Publikováno v:
E3S Web of Conferences, Vol 121, p 01011 (2019)
This paper presents the results of comparative corrosion resistance studies of stainless steels manufactured by selective laser melting (SLM) in the initial state with subsequent heat treatment and machining. Pitting corrosion tests are carried out,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9aa899fc7123e771ba27427497e2937b
https://www.e3s-conferences.org/articles/e3sconf/pdf/2019/47/e3sconf_cr18_01011.pdf
https://www.e3s-conferences.org/articles/e3sconf/pdf/2019/47/e3sconf_cr18_01011.pdf
Publikováno v:
MATEC Web of Conferences, Vol 315, p 13001 (2020)
In this work, to study the effect of laser powder bed fusion (L-PBF) parameters on the microstructure and mechanical properties of 321 austenitic steel, a series of samples were created combining various combinations of L-PBF technological modes, suc
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::90f922ff142a9965d957154923d6e53e
https://doi.org/10.1051/matecconf/202031513001
https://doi.org/10.1051/matecconf/202031513001
Publikováno v:
Additive Manufacturing of High-performance Metals and Alloys-Modeling and Optimization
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=intech______::3109dcde53f62037af47a3d2b63fc690
http://www.intechopen.com/articles/show/title/structure-and-properties-of-the-bulk-standard-samples-and-cellular-energy-absorbers
http://www.intechopen.com/articles/show/title/structure-and-properties-of-the-bulk-standard-samples-and-cellular-energy-absorbers