Zobrazeno 1 - 10
of 37
pro vyhledávání: '"Vincenzo Bellantone"'
Publikováno v:
Micromachines, Vol 15, Iss 2, p 266 (2024)
This work investigates micro-electro discharge machining (EDM) performance involving deionized and tap water. The chosen machining regime was semi-finishing, where open voltage (from 100 to 130 V) and current values (5–10 A) were applied using a 0.
Externí odkaz:
https://doaj.org/article/f8a3f36c52d84de2b38d14fa4375aeca
Publikováno v:
Journal of Manufacturing and Materials Processing, Vol 8, Iss 1, p 21 (2024)
Optical measurements are increasingly widely used as preferential techniques to evaluate dimensional and surface quantities in micro-products. However, uncertainty estimation is more critical on micro-products than macro, and it needs careful attenti
Externí odkaz:
https://doaj.org/article/9540ffcb9f434eeeba687da03855ebb1
Publikováno v:
Polymers, Vol 14, Iss 18, p 3775 (2022)
Quality evaluation of micro injection molded products is a complex task, in particular when instruments basing on contact methods are used and issues in measurements could arise due to the contact tool dimension not fitting well with extremely narrow
Externí odkaz:
https://doaj.org/article/db18e8db5c444188a028fc8d3d1e58bb
Publikováno v:
Polymers, Vol 13, Iss 11, p 1848 (2021)
At the present time, there is a growing interest in additive manufacturing (AM) technologies and their integration into current process chains. In particular, the implementation of AM for tool production in micro injection molding (µ-IM), a well-est
Externí odkaz:
https://doaj.org/article/117226fbe14b42719bac0d74f5ba1027
Publikováno v:
Micromachines, Vol 11, Iss 10, p 932 (2020)
In this paper, the effect of the micro-electro discharge machining (EDM) milling machinability of Si3N4–TiN workpieces was investigated. The material removal rate (MRR) and tool wear rate (TWR) were analyzed in relation to discharge pulse types in
Externí odkaz:
https://doaj.org/article/62b7c6bac8db4c968e74c931a9f6d026
Autor:
Guido Li Volsi, Ines Paola Monte, Alessandro Aruta, Alfio Gulizzi, Andrea Libra, Stefano Mirulla, Gianluca Panebianco, Giovanni Patti, Ferdinando Quattrocchi, Vincenzo Bellantone, Walter Castorina, Stefano Arcifa, Filippo Papale
Publikováno v:
Aerospace Medicine and Human Performance. 94:475-479
BACKGROUND: Heart rate (HR) indicates the number of beats per minute (bpm) of the heart, while heart rate variability (HRV) indicates the temporal fluctuation of the intervals between adjacent beats (NN). HRV expresses neuro-cardiac activity and is g
Autor:
Filippo Papale, Stefano Arcifa, Walter Castorina, Vincenzo Bellantone, Ferdinando Quattrocchi, Giovanni Patti, Gianluca Panebianco, Stefano Mirulla, Andrea Libra, Alfio Gulizzi, Alessandro V. Aruta, Ines Paola Monte, Guido Li Volsi
Heart rate (HR) indicates the number of beats per minute (bpm) of the heart, while heart rate variability (HRV) indicates the temporal fluctuation of the intervals between adjacent beats (NN). HRV expresses neuro-cardiac activity and is generated by
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ca7c4f33c087f6923d0cb33b6a88e55b
https://hdl.handle.net/20.500.11769/545349
https://hdl.handle.net/20.500.11769/545349
Publikováno v:
Polymers
Volume 13
Issue 11
Polymers, Vol 13, Iss 1848, p 1848 (2021)
Polymers (Basel) 13 (2021): 1–18. doi:10.3390/polym13111848
info:cnr-pdr/source/autori:Surace, Rossella; Basile, Vito; Bellantone, Vincenzo; Modica, Francesco; Fassi, Irene/titolo:Micro injection molding of thin cavities using stereolithography for mold fabrication/doi:10.3390%2Fpolym13111848/rivista:Polymers (Basel)/anno:2021/pagina_da:1/pagina_a:18/intervallo_pagine:1–18/volume:13
Volume 13
Issue 11
Polymers, Vol 13, Iss 1848, p 1848 (2021)
Polymers (Basel) 13 (2021): 1–18. doi:10.3390/polym13111848
info:cnr-pdr/source/autori:Surace, Rossella; Basile, Vito; Bellantone, Vincenzo; Modica, Francesco; Fassi, Irene/titolo:Micro injection molding of thin cavities using stereolithography for mold fabrication/doi:10.3390%2Fpolym13111848/rivista:Polymers (Basel)/anno:2021/pagina_da:1/pagina_a:18/intervallo_pagine:1–18/volume:13
At the present time, there is a growing interest in additive manufacturing (AM) technologies and their integration into current process chains. In particular, the implementation of AM for tool production in micro injection molding (µ-IM), a well-est
Autor:
Luigi Maria Galantucci, Francesco Modica, Irene Fassi, Rossella Surace, Vincenzo Bellantone, Onofrio Spadavecchia, Maria Grazia Guerra, Fulvio Lavecchia
Publikováno v:
Journal of Micro-and Nano-Manufacturing 9 (2021): 030903-1–030903-9. doi:10.1115/1.4051485]
info:cnr-pdr/source/autori:Vincenzo Bellantone, Fulvio Lavecchia, Rossella Surace, Onofrio Spadavecchia, Francesco Modica, Maria Grazia Guerra, Irene Fassi, Luigi Maria Galantucci/titolo:Design and Experimental Validation of a Process Chain for Thin Components Manufacturing by Micro Injection Molding Process/doi:10.1115%2F1.4051485]/rivista:Journal of Micro-and Nano-Manufacturing/anno:2021/pagina_da:030903-1/pagina_a:030903-9/intervallo_pagine:030903-1–030903-9/volume:9
info:cnr-pdr/source/autori:Vincenzo Bellantone, Fulvio Lavecchia, Rossella Surace, Onofrio Spadavecchia, Francesco Modica, Maria Grazia Guerra, Irene Fassi, Luigi Maria Galantucci/titolo:Design and Experimental Validation of a Process Chain for Thin Components Manufacturing by Micro Injection Molding Process/doi:10.1115%2F1.4051485]/rivista:Journal of Micro-and Nano-Manufacturing/anno:2021/pagina_da:030903-1/pagina_a:030903-9/intervallo_pagine:030903-1–030903-9/volume:9
Micro-applications, especially in biomedical and optical sectors, require the fabrication of thin polymeric parts which can be commonly realized by micro-injection molding process. However, this process is characterized by a relevant constraint regar
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::34891f893643ef1fe90d893f59814033
http://hdl.handle.net/11589/237038
http://hdl.handle.net/11589/237038
Autor:
Massimo Vighi, Irene Fassi, Francesco Baldi, Claudia Pagano, Sara Sechi, Rossella Surace, Grégory Stoclet, Simone Gatti, Leonardo Castellani, Vincenzo Bellantone
Publikováno v:
Polymer (Guildford) 230 (2021): 1–13. doi:10.1016/j.polymer.2021.124035
info:cnr-pdr/source/autori:Surace R.; Pagano C.; Bellantone V.; Gatti S.; Castellani L.; Vighi M.; Stoclet G.; Sechi S.; Fassi I.; Baldi F./titolo:Injection vs micro-injection molding of nano-particle filled polyamide 6: Moldability and structuring/doi:10.1016%2Fj.polymer.2021.124035/rivista:Polymer (Guildford)/anno:2021/pagina_da:1/pagina_a:13/intervallo_pagine:1–13/volume:230
info:cnr-pdr/source/autori:Surace R.; Pagano C.; Bellantone V.; Gatti S.; Castellani L.; Vighi M.; Stoclet G.; Sechi S.; Fassi I.; Baldi F./titolo:Injection vs micro-injection molding of nano-particle filled polyamide 6: Moldability and structuring/doi:10.1016%2Fj.polymer.2021.124035/rivista:Polymer (Guildford)/anno:2021/pagina_da:1/pagina_a:13/intervallo_pagine:1–13/volume:230
In this work, the moldability via micro-injection molding (μIM) of nano-filled polyamide 6 (PA6) based systems and the microstructural characteristics of the micro-injected parts were investigated and compared to those observed via traditional injec