Zobrazeno 1 - 10
of 26
pro vyhledávání: '"Vicente Albaladejo-Fuentes"'
Autor:
Andrea Garfias, María Sarret, Javier Sánchez, Irene G. Cano, Vicente Albaladejo-Fuentes, Teresa Andreu
Publikováno v:
Applied Surface Science Advances, Vol 24, Iss , Pp 100649- (2024)
This work investigates the microstructure and manufacturing control of the masked Cold Spray Additive Manufacturing (CSAM) strategy for producing of new bipolar plates (BPPs) for Proton Exchange Membrane (PEM) electrolyzers, using low-cost, lightweig
Externí odkaz:
https://doaj.org/article/1838ae78155d41adabb66ba82377b316
Autor:
Vicente Albaladejo-Fuentes, María-Salvadora Sánchez-Adsuar, James A. Anderson, María-José Illán-Gómez
Publikováno v:
Nanomaterials, Vol 11, Iss 8, p 2133 (2021)
The NOx storage mechanism on BaTi0.8Cu0.2O3 catalyst were studied using different techniques. The results obtained by XRD, ATR, TGA and XPS under NOx storage–regeneration conditions revealed that BaO generated on the catalyst by decomposition of Ba
Externí odkaz:
https://doaj.org/article/c8f32d93060143a2a8c2c54d7a67deea
Autor:
Verónica Torregrosa-Rivero, Carla Moreno-Marcos, Vicente Albaladejo-Fuentes, María-Salvadora Sánchez-Adsuar, María-José Illán-Gómez
Publikováno v:
Nanomaterials, Vol 9, Iss 11, p 1551 (2019)
BaFe1-xCuxO3 perovskites (x = 0, 0.1, 0.3 and 0.4) have been synthetized, characterized and tested for soot oxidation in both Diesel and Gasoline Direct Injection (GDI) exhaust conditions. The catalysts have been characterized by BET, ICP-OES, SEM-ED
Externí odkaz:
https://doaj.org/article/65331bb92b404aa2998258d916174780
Publikováno v:
Materials; Volume 16; Issue 13; Pages: 4735
Cold Spray Additive Manufacturing (CSAM) is a thermal spray technique that is typically used for the repair of metallic components. One of the challenges of CSAM is to improve the geometrical accuracy of the sprayed parts, along with overcoming the i
Autor:
Jordi, Pijuan, Sasha Alejandra, Cegarra, Sergi, Dosta, Vicente, Albaladejo-Fuentes, María Dolores, Riera
Publikováno v:
Materials (Basel, Switzerland). 15(22)
Centrifugal atomization is a rapid solidification technique for producing metal powders. However, its wide application has been limited to the production of common metal powders and their corresponding alloys. Therefore, there is a lack of research o
Autor:
Rodolpho F. Vaz, Vicente Albaladejo-Fuentes, Javier Sanchez, Unai Ocaña, Ziortza G. Corral, Horacio Canales, Irene G. Cano
Publikováno v:
Materials; Volume 15; Issue 19; Pages: 6785
Cold Spray Additive Manufacturing (CSAM) is an emergent technique to produce parts by the additive method, and, like other technologies, it has pros and cons. Some advantages are using oxygen-sensitive materials to make parts, such as Ti alloys, with
Autor:
Vicente Albaladejo-Fuentes, Ana Maria Martos, Alessio Silvello, Sergi Dosta, Javier Sanchez, Irene G. Cano
Publikováno v:
Encyclopedia of Materials: Metals and Alloys ISBN: 9780128197332
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::46b88cd148f0b3be3995754cccbdb882
https://doi.org/10.1016/b978-0-12-819726-4.00124-1
https://doi.org/10.1016/b978-0-12-819726-4.00124-1
Publikováno v:
Nanomaterials
Volume 11
Issue 8
RUA. Repositorio Institucional de la Universidad de Alicante
Universidad de Alicante (UA)
Dipòsit Digital de la UB
Universidad de Barcelona
Nanomaterials, Vol 11, Iss 2133, p 2133 (2021)
Volume 11
Issue 8
RUA. Repositorio Institucional de la Universidad de Alicante
Universidad de Alicante (UA)
Dipòsit Digital de la UB
Universidad de Barcelona
Nanomaterials, Vol 11, Iss 2133, p 2133 (2021)
The NOx storage mechanism on BaTi0.8Cu0.2O3 catalyst were studied using different techniques. The results obtained by XRD, ATR, TGA and XPS under NOx storage–regeneration conditions revealed that BaO generated on the catalyst by decomposition of Ba
Publikováno v:
Metals
Volume 11
Issue 7
Dipòsit Digital de la UB
Universidad de Barcelona
Metals, Vol 11, Iss 1092, p 1092 (2021)
Volume 11
Issue 7
Dipòsit Digital de la UB
Universidad de Barcelona
Metals, Vol 11, Iss 1092, p 1092 (2021)
The use of the cold gas spray (CGS) process as a metal additive manufacturing (MAM) technique for metallic part production has been deeply studied recently, mainly due to its advantages over other MAM techniques. CGS MAM is a high-productivity techni
Autor:
Carla Moreno-Marcos, María José Illán-Gómez, Vicente Albaladejo-Fuentes, M. S. Sánchez-Adsuar, Verónica Torregrosa Rivero
Publikováno v:
RUA. Repositorio Institucional de la Universidad de Alicante
Universidad de Alicante (UA)
Universidad de Alicante (UA)
A series of BaFe1−xCuxO3 catalysts (x = 0, 0.1, 0.3 and 0.4) have been synthetized, characterized and used for soot oxidation in gasoline direct injection (GDI) exhaust conditions. The characterization of the catalysts (by BET, ICP-OES, XRD, XPS, H