Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Van-Cuong Do"'
Publikováno v:
Advances in Mechanical Engineering, Vol 10 (2018)
In this study, to estimate the forming limit curves of a steel DP350 sheet, a combination of the finite element method simulation and experimental methods was adopted using the fracture height of experimental specimens and the corresponding in-plane
Externí odkaz:
https://doaj.org/article/c0a3f77fb0dd45fe9abf517056f2fc3d
Publikováno v:
INTERNATIONAL JOURNAL of FUZZY LOGIC and INTELLIGENT SYSTEMS. 18:41-49
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 92:4445-4455
Computer-aided manufacturing technology is widely used in the sheet-forming industry to predict forming performance. Strain-based forming limit criterion is popularly used for this purpose. In incremental sheet forming, the forming limit curve at fra
Publikováno v:
International Journal of Precision Engineering and Manufacturing. 18:453-460
This paper studies the mechanical properties, formability and effect of hole bridge (hole lancing) in the single point incremental forming for Al5052-O with the thickness of 0.8 mm. The mechanical properties, including anisotropy property and stress-
Autor:
Van-Cuong Do, Young-Suk Kim
Publikováno v:
Procedia Engineering. 184:35-42
In the single point incremental sheet forming (SPIF) process, the part accuracy and maximum forming angle are limited in comparison with conventional stamping method. The blank sheet boundary is fixed to prevent it from drawing in during the forming
Autor:
Van-Cuong Do, Hong-Xiang Ren
Publikováno v:
2019 2nd Asia Conference on Energy and Environment Engineering (ACEEE).
The calculation and prediction the tide are now available for a variety purposes. In order to improve the accuracy of forecasting and prevention of oil spill pollution at sea, it is very important to forecast the direction and velocity of the current
Autor:
Hong-Xiang Ren, Van-Cuong Do
Publikováno v:
Journal of computing and information technology
Volume 27
Issue 4
Journal of Computing and Information Technology, Vol 27, Iss 4, Pp 31-46 (2019)
Volume 27
Issue 4
Journal of Computing and Information Technology, Vol 27, Iss 4, Pp 31-46 (2019)
Fluid simulation is one of the most complex tasks in three-dimensional simulation. Specifically, in the case of oil spills at sea, the oil film constantly interacts and is influenced by the environment, thus making its composition and properties chan
Publikováno v:
Metals and Materials International. 22:974-981
3D-structured (embossed) aluminium sheets have been used as heat insulation materials in automotive exhaust parts because the embossments on the sheets increase the surface area and reinforce the stiffness of exhaust components. Unlike the press-form
Publikováno v:
International Journal of Precision Engineering and Manufacturing. 17:217-223
In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incr
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.