Zobrazeno 1 - 10 of 29 pro vyhledávání: '"Van Tron Tran"'
1
Akademický článek
Optimization design for die-sinking EDM process parameters employing effective intelligent method
Autor: Van Tron Tran, Minh Huy Le, Minh Thai Vo, Quoc Trung Le, Van Huong Hoang, Ngoc-Thien Tran, Van-Thuc Nguyen, Thi-Anh-Tuyet Nguyen, Hoai Nam Nguyen, Van Thanh Tien Nguyen, Thanh Tan Nguyen
Publikováno v: Cogent Engineering, Vol 10, Iss 2 (2023)
AbstractElectrical discharge machining (EDM) is a highly regarded method for producing ultra-precise mechanical parts. In this study, the process parameters of die-sinking EDM using copper electrodes and American Iron and Steel Institute (AISI) P20 t
Externí odkaz: https://doaj.org/article/e77d48a048e24e8ca673bee50e1019e6
Zobrazit plný text záznamu
2
Akademický článek
Influences of Material Selection, Infill Ratio, and Layer Height in the 3D Printing Cavity Process on the Surface Roughness of Printed Patterns and Casted Products in Investment Casting
Autor: Thanh Tan Nguyen, Van Tron Tran, Thi Hong Nga Pham, Van-Thuc Nguyen, Nguyen Chi Thanh, Hong Minh Nguyen Thi, Nguyen Vu Anh Duy, Duy Nguyen Thanh, Van Thanh Tien Nguyen
Publikováno v: Micromachines, Vol 14, Iss 2, p 395 (2023)
As 3D-printed (3DP) patterns are solid and durable, they can be used to create thin wall castings, which is complicated with wax patterns because of the wax’s fragility and high shrinkage ratio. According to this study’s experiment results, polyl
Externí odkaz: https://doaj.org/article/4476c652f27c4ce2b326566f1f74466c
Zobrazit plný text záznamu
3
Akademický článek
A STUDY ON THE ABILITY TO FABRICATE MOLD USING 3D PRINTING TECHNOLOGY AND EVALUATE THE SURFACE ROUGHNESS OF PRODUCTS IN INVESTMENT CASTING.
Autor: Thanh Tan NGUYEN, Dao Hai SON, Van Tron TRAN
Publikováno v: Journal of Machine Engineering; 2024, Vol. 24 Issue 3, p106-118, 13p
Zobrazit plný text záznamu
5
Research on Tensile Strength of PBT/EVA Blends
Autor: Quang My Au, Tuong Vi Tran, Thi Hong Nga Pham, Tan Quoc Huynh, Minh Trong Tin Vo, Minh The Uyen Tran, Vinh Tien Nguyen, Van Tron Tran, Xuan-Tien Vo, Nguyen Anh Tuan Huynh, Van-Thuc Nguyen, Thanh Tan Nguyen
Publikováno v: Journal of Technical Education Science. :27-34
This research study analyzes the mechanical properties of the PBT/EVA blend. Made by adding EVA to PBT in specific proportions, the samples used for the analysis will use injection molding. The percentage of EVA added to PBT was 0%, 5%, 10%, 15%, 20%
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::5d905716319457cb384dfa1574eb0755
https://doi.org/10.54644/jte.74.2023.1333
Zobrazit plný text záznamu
6
Effect of PC Percentages on Hardness and Notched Impact Strength of PBT/PC Blends
Autor: Thi Hong Nga Pham, Nguyen Phuong Duy Tran, Thien Khiem Tran, Thanh Tan Nguyen, Xuan Tien Vo, Ngoc Thien Tran, Van Tron Tran, Minh The Uyen Tran, Van Huong Hoang
Publikováno v: Solid State Phenomena. 329:17-22
Polybutylene terephthalate (PBT) has been proven to be a potential material for modern car bumpers. However, the potential of PBT is limited by its low notched impact strength. The main aim of this study is the improvement in the notched impact stren
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::da6e6848ba235a6d1ac706a07121f6c1
https://doi.org/10.4028/p-781ca3
Zobrazit plný text záznamu
9
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
10
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje