Zobrazeno 1 - 10
of 58
pro vyhledávání: '"V. V. Chervyakov"'
Autor:
N. G. Shubkin, V. I. Tolmachev, S. V. Ivanov, V. V. Chervyakov, L. D. Butakov, V. A. Vizir, B.M. Kovalchuk, V. I. Manylov, V. V. Yur'ev
Publikováno v:
Instruments and Experimental Techniques. 47:468-471
A modulator designed as a power supply for a microwave magnetron with an output peak power of 3 MW and mean power of 10 kW is described. The 100 transistors used in the modulator are connected in parallel, and their capacitors are switched to the pri
Publikováno v:
Instruments and Experimental Techniques. 50:221-223
A generator has been designed for pumping a pseudospark gas discharge in xenon with the aim of generating UV radiation at a wavelength of 13.5 nm. The output parameters of the generator are as follows: the pulse energy is 10 J, the voltage is 6 kV, t
Autor:
D. Kh’yui, A. N. Bastrikov, V. A. Vizir, N. V. Tsoi, A.A. Kim, E. V. Kumpyak, B.M. Kovalchuk, V. V. Chervyakov, S. V. Loginov, P. Monjaux
Publikováno v:
Russian Physics Journal. 40:1142-1153
A description is given of sections of a linear pulse transformer (a linear transformer driver, LTD) intended for use as a fast primary storage device in pulse generators with intermediate inductive energy storage. The results of tests of LTDs consist
Autor:
V A Basov, N. G. Shubkin, E. F. Balbonenko, I N Konovalov, V. V. Chervyakov, V. A. Vizir, K D Sak
Publikováno v:
Quantum Electronics. 25:525-528
An investigation was made of an electric-discharge XeCl laser with the active region of 4 cm × 5.5 cm × 100 cm dimensions. The laser was pumped by one of two pulse generators: a generator with a two-circuit configuration, a peaking capacitor, and a
Autor:
G.V. Smorudov, E A Fomin, V. S. Skakun, V. V. Chervyakov, E. A. Sosnin, V. A. Vizir, Viktor F Tarasenko
Publikováno v:
Quantum Electronics. 25:494-497
An experimental investigation was made of the radiation emitted by pulsed coaxial excimer light sources ('excilamps') pumped by barrier and longitudinal discharges. Stable operation of excilamps was demonstrated at pulse repetition frequencies up to
Autor:
L. D. Butakov, V.V. Yuriev, V.I. Tolmacev, B.M. Kovalchuk, V. A. Vizir, S.N. Ivanov, N. G. Shubkin, V. V. Chervyakov, V.I. Manilov
Publikováno v:
Digest of Technical Papers. PPC-2003. 14th IEEE International Pulsed Power Conference (IEEE Cat. No.03CH37472).
Typical modulators for magnetrons are based usually on the lamp or thyratron switches [E.M. Verechagin, 1972]. Now powerful and reliable solid state switches are available, which can compete with lamps and thyratrons in power and switching time, but
Autor:
V.I. Manilov, A.D. Maksimenko, B.M. Kovalchuk, V.B. Zorin, S. V. Ivanov, G.V. Smorudov, N. G. Shubkin, V. A. Vizir, V. V. Chervyakov
Publikováno v:
IEEE Conference Record - Abstracts. PPPS-2001 Pulsed Power Plasma Science 2001. 28th IEEE International Conference on Plasma Science and 13th IEEE International Pulsed Power Conference (Cat. No.01CH37255).
The generator is intended to supply plasma immerse ion implanters. It has the following parameters: voltage pulse amplitude - (20/spl divide/60) kV, current pulse amplitude - (100/spl divide/40) A, pulse length - (5/spl divide/20) /spl mu/s, leading
Autor:
N. G. Shubkin, A Yu Vinokhodov, V. I. Manylov, Yu B Kiryukhin, S G Kuznetsov, V. A. Vizir, E V Evstratov, S. P. Nosenko, Vladimir M. Borisov, V. V. Chervyakov, Yu Yu Stepanov, S. M. Gerasimov, S. P. Sychev
Publikováno v:
Soviet Journal of Quantum Electronics. 21:162-164
The results are given of the construction of a high-power excimer laser capable of generating λ = 308-nm radiation with an average power of ~ 600 W. The laser power supply system was based on four commercial thyratrons and a magnetic switch. As an e
Autor:
Vadim A. Vizir, Yu B Kiryukhin, V. I. Manylov, V. V. Chervyakov, S. P. Sychev, S. P. Nosenko, N. G. Shubkin
Publikováno v:
SPIE Proceedings.
The magnetic pulse compressor is intended for pumping the excixner discharge laser (EDL) with a mean radiation power of 1 kW and pulse repetition frequency as high as 200 Hz. The compressor is formed by the input stage, consisting of four parallel ca
Publikováno v:
Metal Science and Heat Treatment. 17:938-940