Zobrazeno 1 - 10
of 24
pro vyhledávání: '"V. R. Ranganath"'
Publikováno v:
Journal of Materials Engineering and Performance.
Publikováno v:
Fracture Failure Analysis of Fiber Reinforced Polymer Matrix Composites ISBN: 9789811606410
The static compression test is performed on various carbon fiber reinforced plastic (CFRP) epoxy-based laminate panels manufactured with the vacuum enhanced resin infusion technology (VERITy) process. These tests are conducted for establishing the co
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a511ec9e960c2ebbb778f819d0f72e8f
https://doi.org/10.1007/978-981-16-0642-7_5
https://doi.org/10.1007/978-981-16-0642-7_5
Publikováno v:
Journal of Mechanical Science and Technology. 32:1985-1993
Piezoelectric material based energy harvesting system (EHS) has been designed and developed to study the influence of delamination on EHS in low frequency vibrating beam structures. The stiffness reduction due to the presence of delamination of speci
Publikováno v:
Mechanics of Advanced Materials and Structures. 25:756-765
Unidirectional (UD) and bidirectional (BD) woven carbon fiber reinforced plastic (CFRP) composites were tested under three-point flexure at different span lengths ranging from 20 to 60 mm. Expectedly, flexure load decreases with increasing span lengt
Publikováno v:
Materialwissenschaft und Werkstofftechnik. 46:644-651
Damage mechanisms in unidirectional (UD) and bi-directional (BD) woven carbon fiber reinforced polymer (CFRP) laminates subjected to four point flexure, both in static and fatigue loadings, were studied. The damage progression in composites was monit
Publikováno v:
Metallurgical and Materials Transactions A. 45:3179-3183
High temperature deformation behavior of as-cast Al-3Mg-0.25Sc alloy was characterized in a wide range of temperatures 573 K to 773 K (300 °C to 500 °C) and strain rates (0.001 to 10 s−1). A threshold stress behavior is observed in the temperatur
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 229:439-446
Resin infusion process with/without the application of external pressure was employed for fabrication of unidirectional carbon fiber reinforced plastic composites. The prepared samples were tested under compression loads. Three kinds of fracture mode
Autor:
V. R. Ranganath, Raja S, Aravindu .B, Siva Subba Rao Patange, G. T. Suchithra, B. Jyothi, B. R. Kaveri
Publikováno v:
2016 International Conference on Electrical, Electronics, Communication, Computer and Optimization Techniques (ICEECCOT).
The damage identification in the aircraft structure is an essential process. There are many damage detection methods well established under Non-Destructive Evaluation (NDE). Damage is nothing but changes found in the structure or material due to exte
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 224:271-282
We use the results of new fatigue experiments conducted with variable load levels as well as variable stress ratios to critically assess three (two old and one relatively new) cumulative fatigue damage models. Such models are usually tested using mul
Publikováno v:
Fatigue & Fracture of Engineering Materials and Structures. 30:863-876
A comparative evaluation of fatigue and fracture behaviour of commercially produced cast and forged rail wheels has been made using specimens extracted from various locations of the wheel quadrant. A systematic investigation in the web and rim region