Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Uh-Cheul Jeong"'
Autor:
Jeonghwa Seo, Hak-Kyu Choi, Uh-Cheul Jeong, Dong Kun Lee, Shin Hyung Rhee, Chul-Min Jung, Jaehoon Yoo
Publikováno v:
International Journal of Naval Architecture and Ocean Engineering, Vol 8, Iss 5, Pp 442-455 (2016)
The resistance and seakeeping performance of a high-speed monohull vessel were investigated through a series of model tests in a towing tank. The hull had a slender wave-piercing bow, round bilge, and small deadrise angle on stern. Tests on the bare
Externí odkaz:
https://doaj.org/article/a1ae8ac1077a4d4294eed1076ced0a23
Publikováno v:
Journal of the Korean Society of Mechanical Technology. 21:1065-1070
In this study, a high speed planing boat with 7.2 meters in length is developed as the beam larger about 10% by comparing with the general planing boat. The design speed of a boat is 30 knots (about 15.4 m/s) by using 150 hp outboard engine and the m
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::adc5fd947a78d8e0146191a2fe6827b9
https://doi.org/10.17958/ksmt.21.6.201912.1065
https://doi.org/10.17958/ksmt.21.6.201912.1065
Publikováno v:
Journal of Ocean Engineering and Technology. 30:69-74
A new wave-piercing-type high-speed planing boat without a chin e was developed, and its basic performance was investigated in a model test, including the resistance, trim, and sinkage. The maximum speed of the developed ship was 35 knots. The hull f
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e3db6093126985725eb62342217dd441
https://doi.org/10.5574/ksoe.2016.30.2.069
https://doi.org/10.5574/ksoe.2016.30.2.069
Publikováno v:
Journal of the Korean Society of Marine Environment and Safety. 22:246-252
In this study, conceptual design of the fore-body hull form of catamaran type dredging vessel was performed that can effectively remove the contaminated sediments in coastal seabed. The hull form was simpled for the easy hull construction and the res
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c72e5fe35717ea08f59f7c411eb0e0e5
https://doi.org/10.7837/kosomes.2016.22.2.246
https://doi.org/10.7837/kosomes.2016.22.2.246
Publikováno v:
Journal of Ocean Engineering and Technology. 29:405-410
This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::444c168614d790dc0fa4204fcc801a14
https://doi.org/10.5574/ksoe.2015.29.6.405
https://doi.org/10.5574/ksoe.2015.29.6.405
Publikováno v:
Journal of the Korean Society of Marine Environment and Safety. 19:674-680
Department of Naval Architecture and Ocean Engineering, Mokpo National Maritime University, Mokpo 530-729, Korea Graduate school, Mokpo National Maritime University, Mokpo 530-729, Korea Department of Naval Architecture and Ocean Engineering, Inha Te
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::95c25ed71057f8c2153989d2368816d6
https://doi.org/10.7837/kosomes.2013.19.6.674
https://doi.org/10.7837/kosomes.2013.19.6.674
Publikováno v:
Journal of Navigation and Port Research. 37:63-69
†Dept. of Marine Science and Production, Kunsan National University, Kunsan 573-701, Korea* Dept. of Ship & Ocean System, Inha Technical College, Incheon 402-752, Korea** Marine Simulation Center, Korea Maritime University, Busan 606-791, KoreaAbst
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dfb367601a5d9188b4bc7fb02d28726d
https://doi.org/10.5394/kinpr.2013.37.1.63
https://doi.org/10.5394/kinpr.2013.37.1.63
Autor:
Jaehoon Yoo, Shin Hyung Rhee, Hak-Kyu Choi, Uh-Cheul Jeong, Jeonghwa Seo, Dong Kun Lee, Chul-Min Jung
Publikováno v:
INTERNATIONAL JOURNAL OF NAVAL ARCHITECTURE AND OCEAN ENGINEERING(8): 5
International Journal of Naval Architecture and Ocean Engineering, Vol 8, Iss 5, Pp 442-455 (2016)
International Journal of Naval Architecture and Ocean Engineering, Vol 8, Iss 5, Pp 442-455 (2016)
The resistance and seakeeping performance of a high-speed monohtill vessel were investigated through a series of model tests in a towing tank. The hull had a slender wave-piercing bow, round bilge, and small deadrise angle on stem. Tests on the bare
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6fe098ba50f04237b94404bc5a27d48e
http://open-repository.kisti.re.kr/cube/handle/open_repository/481851.do
http://open-repository.kisti.re.kr/cube/handle/open_repository/481851.do
Publikováno v:
Journal of Ocean Engineering and Technology. 26:14-18
A 30ft class aluminum leisure boat is newly developed and the resistance performances are investigated by a model test at a high-speed circulating water channel. The effect of a fin attached to the side of the hull is studied at two different displac
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bdf2b2b30ce7f300087ff4380db85642
https://doi.org/10.5574/ksoe.2012.26.6.014
https://doi.org/10.5574/ksoe.2012.26.6.014
Publikováno v:
Transactions of the Society of CAD/CAM Engineers. 17:188-197
Recently, aluminum ships are constructed more than ever because of the environmental pollution generated by FRP (Fiber Reinforced Plastic) ships. In particular, FRP ships have been replaced by the Aluminum ships. The forming process of the curved alu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b8025dac3ee618ba8c75e699034bf6fe
https://doi.org/10.7315/cadcam.2012.188
https://doi.org/10.7315/cadcam.2012.188